Skip to content

regulator: twl6030: Fix the VMMC reset behavior

Gregory CLEMENT linux-devicetree linux-omap lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: regulator: twl6030: Add retain-on-reset propertyDocumentation/devicetree/bindings/regulator/twl-regulator.txt+7 -01 reply
2/3regulator: twl6030: use variable for device nodedrivers/regulator/twl6030-regulator.c+3 -31 reply
3/3regulator: twl6030: workaround the VMMC reset behaviordrivers/regulator/twl6030-regulator.c+14 -11 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] regulator: twl6030: Fix the VMMC reset behavior

Hello,

With the TWL6030 PMIC, during reset the VMMC regulator doesn't reach 0V and only drops to 1.8V, furthermore the pulse width is under 200us whereas the SD specification expect 1ms.

Fortunately, the WR_S bit allows the TWL6030 to no reset at all the VMMC during warm reset and keep the current voltage. Thanks to this workaround the SD card doesn't reach a undefined reset stage.

The first patch describes the new property needed for this "feature".

The second one is just a small cleanup done while I wrote the last patch, but as it was not really related to the feature itself, I made a separate patch for it.

The last patch adds the feature in the driver.

Gregory

Gregory CLEMENT (3):
dt-bindings: regulator: twl6030: Add retain-on-reset property
regulator: twl6030: use variable for device node
regulator: twl6030: workaround the VMMC reset behavior

 .../bindings/regulator/twl-regulator.txt      |  7 +++++++
 drivers/regulator/twl6030-regulator.c         | 21 +++++++++++++++----
 2 files changed, 24 insertions(+), 4 deletions(-)
Signature · 1 line
2.20.1