i.MX8QM ROM 7720 a1 board won't boot
Get series with b4
b4 am 20190819060959.GA29740@optiplexVersions newest first
- v1 Latest0 of 1 patch 0 repliesNew
Patches in v1 No applies recorded yet
The patch the cover letter announces is not in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/1] i.MX8QM ROM 7720 a1 board won't boot
Quoted 27 lines · Peng Fan
Quoted 27 lines
Subject: Re: [PATCH 0/1] i.MX8QM ROM 7720 a1 board won't boot
Quoted 23 lines · Marcel Ziswiler
Hi Oliver
Quoted 2 lines · Oliver Graute
I'am currently working on the following patch to get the imx8qm- rom7720-a1
That version sounds suspiciously like it may be based on initial alpha silicon from NXP which as far as I know is not supported anywhere any more. Not even in downstream.
If it has alpha silicon my suggestion is to throw it away and move on.
Quoted 1 line
board working with recent u-boot v2019.07.
v2019.07 has long since been released. So what you are talking about would be any future release like v2020.01 as even the v2019.10 merge window long since closed.
Quoted 2 lines
Unfortunaly I get no output on my
serial line.Alpha chips came with different boot ROM requiring completely different SCFW as far as I know.
Quoted 6 lines
Quoted 3 lines
I have to correct myself. After some investigation I can say that I have the B-Silicium of imx8qm on this board. So should I rename everything from a1 to b1?
Check scfw uart to see whether there is any output from scu uart. Make sure you using and adapt scfw to your board.
ok, there is no output on scu uart. So its broken before u-boot launch.
With nxp vendor boostream (scfw + atf + u-boot-imx) I see some output and a little cmd line. So I have to check the stuff before u-boot first.
Best Regards,
Oliver