Skip to content

arm64: Add support for Amlogic SM1 SoC Family

Neil Armstrong linux-amlogic linux-arm-kernel linux-devicetree lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 6 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDsdrivers/soc/amlogic/meson-gx-socinfo.c+2 -00 replies
2/6dt-bindings: soc: amlogic: clk-measure: Add SM1 compatibleDocumentation/devicetree/bindings/soc/amlogic/clk-measure.txt+1 -00 replies
3/6soc: amlogic: clk-measure: Add support for SM1drivers/soc/amlogic/meson-clk-measure.c+134 -00 replies
4/6dt-bindings: arm: amlogic: add SM1 bindingsDocumentation/devicetree/bindings/arm/amlogic.yaml+3 -01 reply
5/6dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindingsDocumentation/devicetree/bindings/arm/amlogic.yaml+2 -01 reply
6/6arm64: dts: add support for SM1 based SEI Robotics SEI610arch/arm64/boot/dts/amlogic/Makefile arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts arch/arm64/boot/dts/amlogic/meson-sm1.dtsi+369 -02 replies

Reviews trailers per patch

5 of 6 patches have a Reviewed-by or Acked-by.

PatchMartin BlumenstinglRob HerringJerome BrunetKevin Hilman
SeriesT-b
1/6R-b R-b
2/6R-b R-b
3/6
4/6R-b
5/6R-b
6/6A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.

Read the v1 thread

Cover letter [PATCH 0/6] arm64: Add support for Amlogic SM1 SoC Family

The new Amlogic SM1 SoC Family is a derivative of the Amlogic G12A SoC Family, with the following changes :
- Cortex-A55 cores instead of A53
- more power domains, including USB & PCIe
- a neural network co-processor (NNA)
- a CSI input and image processor
- some changes in the audio complex, thus not yet enabled
- new clocks, for NNA, CSI and a clock tree for each CPU Core

This serie does not add support for NNA, CSI, Audio, USB, Display or DVFS, it only aligns with the current G12A Support.

With this serie, the SEI610 Board has supported :
- Default-boot CPU frequency
- Ethernet
- LEDs
- IR
- GPIO Buttons
- eMMC
- SDCard
- SDIO WiFi
- UART Bluetooth

Audio (HDMI, Embedded HP, MIcs), USB, HDMI, IR Output, & RGB Led would be supported in following patchsets.

Dependencies:
- g12-common.dtsi from the DVFS patchset at [1]

Changes from rfc at [2]:
- Removed Power domain patches & display/USB support, will resend separately
- Removed applied AO-CEC patches
- Fixed clk-measure IDs
- Collected reviewed-by tags

[1] https://patchwork.kernel.org/cover/11025309/
[2] https://patchwork.kernel.org/cover/11025511/

Neil Armstrong (6):
soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs
dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible
soc: amlogic: clk-measure: Add support for SM1
dt-bindings: arm: amlogic: add SM1 bindings
dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings
arm64: dts: add support for SM1 based SEI Robotics SEI610

 .../devicetree/bindings/arm/amlogic.yaml      |   5 +
 .../bindings/soc/amlogic/clk-measure.txt      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../boot/dts/amlogic/meson-sm1-sei610.dts     | 300 ++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi    |  68 ++++
 drivers/soc/amlogic/meson-clk-measure.c       | 134 ++++++++
 drivers/soc/amlogic/meson-gx-socinfo.c        |   2 +
 7 files changed, 511 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
Signature · 1 line
2.22.0