Skip to content

keep console alive even if missing the 'enable' clock

Chunyan Zhang linux-serial lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3serial: sprd: check the right port and membasedrivers/tty/serial/sprd_serial.c+6 -40 replies
2/3serial: sprd: add console_initcall in sprd's uart driverdrivers/tty/serial/sprd_serial.c+7 -00 replies
3/3serial: sprd: keep console alive even if missing the 'enable' clockdrivers/tty/serial/sprd_serial.c+21 -40 replies

Reviews trailers per patch

None of the 3 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchBaolin Wang
SeriesR-b T-b
1/3
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] keep console alive even if missing the 'enable' clock

From: Chunyan Zhang <[email protected]>

After the commit 4007098f4ce4 (serial: sprd: Add power management for the Spreadtrum serial controller), the 'enable' clock was forced to be configured in device tree, otherwise the uart devices couldn't be probed successfully.

With this patch-set, the uart device which is used as console would be allowed to register even without any clock configured in device tree, this will make debug easier.

Chunyan Zhang (3):
serial: sprd: check the right port and membase
serial: sprd: add console_initcall in sprd's uart driver
serial: sprd: keep console alive even if missing the 'enable' clock

 drivers/tty/serial/sprd_serial.c | 42 ++++++++++++++++++++++++++------
 1 file changed, 34 insertions(+), 8 deletions(-)
Signature · 1 line
2.20.1