Skip to content

hwmon: (shtc1) add support for the SHTC3 sensor

Dan Robertson linux-hwmon 1 version Applied

Status from this message: Applied to hwmon-next after making nitpick change (see below).

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 3 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2hwmon: (shtc1) add support for the SHTC3 sensorDocumentation/hwmon/shtc1.rst drivers/hwmon/Kconfig drivers/hwmon/shtc1.c+58 -211 reply
2/2hwmon: (shtc1) fix shtc1 and shtw1 id maskdrivers/hwmon/shtc1.c+3 -32 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] hwmon: (shtc1) add support for the SHTC3 sensor

Sorry for the noise. I submitted the wrong patchset :/

1) Adds support for SHTC3
2) Fixes an error in the bitmask used to get the product code from the ID register. See section 5.7 of the SHTC1 or SHTW1 datasheet for details.

Dan Robertson (2):
hwmon: (shtc1) add support for the SHTC3 sensor
hwmon: (shtc1) fix shtc1 and shtw1 id mask

 Documentation/hwmon/shtc1.rst | 19 ++++++++----
 drivers/hwmon/Kconfig         |  4 +--
 drivers/hwmon/shtc1.c         | 56 ++++++++++++++++++++++++++---------
 3 files changed, 58 insertions(+), 21 deletions(-)
Signature · 1 line
2.23.0