Skip to content

USB: host: ohci-at91: tailor power consumption

Nicolas Ferre linux-arm-kernel linux-usb lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3USB: host: ohci-at91: completely shutdown the controller in at91_stop_hc()drivers/usb/host/ohci-at91.c+1 -10 replies
2/3USB: host: ohci-at91: suspend: delay needed before to stop clocksdrivers/usb/host/ohci-at91.c+1 -00 replies
3/3USB: host: ohci-at91: resume: balance the clock start calldrivers/usb/host/ohci-at91.c+2 -20 replies

Reviews trailers per patch

None of the 3 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchAlan Stern
SeriesA-b
1/3
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] USB: host: ohci-at91: tailor power consumption

Following a set of experiments we found areas of improvement for OHCI power consumption (and associated USB analog cells).
This enhances the shutdown of residual power consumption in case of Linux suspend/resume and removal of the driver (when compiled as a module).

Best regards,
Nicolas

Boris Krasnovskiy (2):
USB: host: ohci-at91: completely shutdown the controller in

    at91_stop_hc()

USB: host: ohci-at91: resume: balance the clock start call

Nicolas Ferre (1):
USB: host: ohci-at91: suspend: delay needed before to stop clocks

 drivers/usb/host/ohci-at91.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
Signature · 1 line
2.17.1