mtd: spi-nor: Quad Enable and (un)lock methods
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v5 Latest6 patches 4 repliesIn review
- v420 patches 21 repliesSuperseded
- v332 patches 34 repliesApplied
Earlier versions · 2
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v2 | 22 patches | 21 replies | Applied | |
| v1 | 23 patches | 7 replies | Superseded |
Changes in v5 from the cover letter
- Rename all Quad Enable methods in one patch
- Extend the Read Back test to both SR1 and SR2 in one patch
- Reorder patches, so that the fixes come one after another
- Collect R-b tags.
Patches in v5 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/6 | mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()drivers/ include/ | +118 | 0 replies | |
| 2/6 | mtd: spi-nor: Rework the disabling of block write protectiondrivers/ include/ | +50 | 1 reply | |
| 3/6 | mtd: spi-nor: Extend the SR Read Back testdrivers/ | +39 | 1 reply | |
| 4/6 | mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1drivers/ include/ | +5 | 0 replies | |
| 5/6 | mtd: spi-nor: Merge spansion Quad Enable methodsdrivers/ | +66 | 0 replies | |
| 6/6 | mtd: spi-nor: Rename Quad Enable methodsdrivers/ include/ | +13 | 1 reply |
Reviews trailers per patch
All 6 patches have a Reviewed-by or Acked-by.
| Patch | Vignesh Raghavendra |
|---|---|
| 1/6 | R-b |
| 2/6 | R-b |
| 3/6 | R-b |
| 4/6 | R-b |
| 5/6 | R-b |
| 6/6 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v5 0/6] mtd: spi-nor: Quad Enable and (un)lock methods
From: Tudor Ambarus <[email protected]>
Tested on w25q128jvq.
Fixed the clearing of QE bit on (un)lock() operations. Reworked the Quad Enable methods and the disabling of the block write protection at power-up.
v5:
- Rename all Quad Enable methods in one patch
- Extend the Read Back test to both SR1 and SR2 in one patch
- Reorder patches, so that the fixes come one after another
- Collect R-b tags.
v4:
- Use dev_dbg insted of dev_err for low level info
- replace "&nor->bouncebuf[0]" with "nor->bouncebuf" and "&sr_cr[0]" with "sr_cr". Update across all patches.
v3: split patches, update retlen handling in sst_write.
v2:
- Introduce spi_nor_write_16bit_cr_and_check() as per Vignesh's suggestion. The Configuration Register contains bits that can be updated in future: FREEZE, CMP. Provide a generic method that allows updating all bits of the Configuration Register.
- Fix SNOR_F_NO_READ_CR case in
"mtd: spi-nor: Rework the disabling of block write protection". When the flash doesn't support the CR Read command, we make an assumption about the value of the QE bit. In spi_nor_init(), call spi_nor_quad_enable() first, then spi_nor_unlock_all(), so that at the spi_nor_unlock_all() time we can be sure the QE bit has value one, because of the previous call to spi_nor_quad_enable().
- Fix if statement in spi_nor_write_sr_and_check():
if (nor->flags & SNOR_F_HAS_16BIT_SR)
- Fix documentation warnings.
- New patch: "mtd: spi-nor: Check all the bits written, not just the BP ones".
- Drop Global Unlock patches, will send them in a different patch set.
The patch set can be tested using mtd-utils:
1/ do a read-erase-write-read-back test immediately after boot, to check the spi_nor_unlock_all() method. The focus is on the erase/write methods, we want to see if the flash is unlocked at power-up.
mtd_debug read /dev/mtd-yours offset size read-file hexdump read-file
mtd_debug erase /dev/mtd-yours offset size
dd if=/dev/urandom of=write-file bs=please-choose count=please-choose mtd_debug write /dev/mtd-yours offset write-file-size write-file mtd_debug read /dev/mtd-yours offset write-file-size read-file sha1sum read-file write-file
2/ lock flash then try to erase/write it, to see if the lock works
flash_lock /dev/mtd-yours offset block-count
Do the read-erase-write-read-back test from 1/. The contents of flash should not change in the erase and write steps.
3/ unlock flash and do the read-erase-write-read-back from 1/. The value of the
QEE should not change and you should be able to erase and write the flash. Test 1/ should be successful.
Tudor Ambarus (6):
mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()
mtd: spi-nor: Rework the disabling of block write protection
mtd: spi-nor: Extend the SR Read Back test
mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1
mtd: spi-nor: Merge spansion Quad Enable methods
mtd: spi-nor: Rename Quad Enable methods
drivers/mtd/spi-nor/spi-nor.c | 438 ++++++++++++++++++++++++------------------ include/linux/mtd/spi-nor.h | 12 +- 2 files changed, 254 insertions(+), 196 deletions(-)
Signature · 1 line
2.9.5