Skip to content

RFC clk: meson: g12a: handle clock hw changes while in suspend

Neil Armstrong linux-amlogic linux-arm-kernel linux-clk lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest2 patches 5 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2clk: introduce clk_invalidate_rate()drivers/clk/clk.c include/linux/clk.h+83 -03 replies
2/2clk: meson: g12a: add suspend-resume hooksdrivers/clk/meson/g12a.c+63 -80 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH RFC 0/2] clk: meson: g12a: handle clock hw changes while in suspend

This serie aime to support when the suspend/resume firmware alters the clock tree, leading to an incorrect representation of the clock tree after a resume from suspend-to-mem.

For the Amlogic G12A/G12B/SM1 case, the SCPI firmware handling suspend alters the CPU clock tree in various ways.

Since we know which part of the tree is possibly altered, we introduce here the clk_invalidate_rate() function that will rebuild the tree from the hardware registers in case parents and dividers have changed.

Finally we call clk_invalidate_rate() from a new resume callback to refresh the CPU clock tree after a resume.

With the clock tree refreshed, CCF can now handle the new clock tree configuration and avoid crashing the system on further DVFS set_rates.

Neil Armstrong (2):
clk: introduce clk_invalidate_rate()
clk: meson: g12a: add suspend-resume hooks

 drivers/clk/clk.c        | 70 +++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/g12a.c | 71 +++++++++++++++++++++++++++++++++++-----
 include/linux/clk.h      | 13 ++++++++
 3 files changed, 146 insertions(+), 8 deletions(-)
Signature · 1 line
2.22.0