Skip to content

RFC dwc3: Changes for HiKey960 support

John Stultz linux-devicetree linux-usb lkml 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 RFC Latest5 patches 9 repliesIn review
  2. v1 RFC5 patches 4 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5dt-bindings: usb: dwc3: Add a property to do a CGTL soft reset on mode switchingDocumentation/devicetree/bindings/usb/dwc3.txt+2 -00 replies
2/5usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Socdrivers/usb/dwc3/core.c drivers/usb/dwc3/core.h+23 -02 replies
3/5usb: dwc3: Increase timeout for CmdAct cleared by device controllerdrivers/usb/dwc3/gadget.c+1 -10 replies
4/5dt-bindings: usb: dwc3: of-simple: add compatible for HiSiDocumentation/devicetree/bindings/usb/hisi,dwc3.txt+52 -07 replies
5/5usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platformdrivers/usb/dwc3/dwc3-of-simple.c+3 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [RFC][PATCH v2 0/5] dwc3: Changes for HiKey960 support

I've been carrying for awhile some patches that Yu Chen was previously pushing upstream to enable USB on the HiKey960 board and I wanted to try to nudge them forward as I'm not sure as to what his plans are.

This series is just the simpler parts of the patch set that I wanted to send out to see if we could make some progress on while I continue to work on the more complex bits.

You can find the full set of changes to get USB working on the board here:
https://git.linaro.org/people/john.stultz/android-dev.git/log/?id=ef858be80f202b7bffb7d03c168ee72457a0ef3e

This series is just the more trivial changes, along with some missing binding documentation that I've added.

I'd greatly appreciate any review or feedback on this series!

thanks
-john

New in v2:
* Tweaked binding clock name as clk_usb3phy_ref didn't seem right.

Cc Greg Kroah-Hartman <[email protected]>
Cc Felipe Balbi <[email protected]>
Cc Andy Shevchenko <[email protected]>
Cc Rob Herring <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Yu Chen <[email protected]>
Cc Matthias Brugger <[email protected]>
Cc Chunfeng Yun <[email protected]>

John Stultz (2):
dt-bindings: usb: dwc3: Add a property to do a CGTL soft reset on mode
switching
dt-bindings: usb: dwc3: of-simple: add compatible for HiSi

Yu Chen (3):
usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for
Hisilicon Kirin Soc
usb: dwc3: Increase timeout for CmdAct cleared by device controller
usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc
Platform

 .../devicetree/bindings/usb/dwc3.txt          |  2 +
 .../devicetree/bindings/usb/hisi,dwc3.txt     | 52 +++++++++++++++++++
 drivers/usb/dwc3/core.c                       | 20 +++++++
 drivers/usb/dwc3/core.h                       |  3 ++
 drivers/usb/dwc3/dwc3-of-simple.c             |  4 +-
 drivers/usb/dwc3/gadget.c                     |  2 +-
 6 files changed, 81 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/hisi,dwc3.txt
Signature · 1 line
2.17.1