Skip to content

Add support for QCOM IOMMU v2 and 500

[email protected] linux-arm-msm linux-iommu 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest7 patches 9 repliesIn review
  2. v37 patches 0 repliesSuperseded
  3. v26 patches 0 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v16 patches1 replySuperseded

Changes in v4 from the cover letter

- Removed rej files from the SCM patch (I'm truly sorry for the noise...)

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7firmware: qcom: scm: Add function to set IOMMU pagetable addressingdrivers/firmware/qcom_scm-32.c drivers/firmware/qcom_scm-64.c drivers/firmware/qcom_scm.c +2 more+34 -04 replies
2/7iommu/qcom: Use the asid read from device-tree if specifiedDocumentation/devicetree/bindings/iommu/qcom,iommu.txt drivers/iommu/qcom_iommu.c+15 -32 replies
3/7iommu/qcom: Write TCR before TTBRs to fix ASID access behaviordrivers/iommu/qcom_iommu.c+7 -70 replies
4/7iommu/qcom: Properly reset the IOMMU contextdrivers/iommu/qcom_iommu.c+21 -21 reply
5/7iommu/qcom: Add support for AArch64 IOMMU pagetablesDocumentation/devicetree/bindings/iommu/qcom,iommu.txt drivers/iommu/qcom_iommu.c+47 -100 replies
6/7iommu/qcom: Index contexts by asid number to allow asid 0drivers/iommu/qcom_iommu.c+9 -110 replies
7/7iommu/qcom: Add support for QCIOMMUv2 and QCIOMMU-500 secured contextsDocumentation/devicetree/bindings/iommu/qcom,iommu.txt drivers/iommu/qcom_iommu.c+19 -20 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [PATCH v4 0/7] Add support for QCOM IOMMU v2 and 500

From: AngeloGioacchino Del Regno <[email protected]>

Some Qualcomm Family-B SoCs have got a different version of the QCOM IOMMU, specifically v2 and 500, which perfectly adhere to the current qcom_iommu driver, but need some variations due to slightly different hypervisor behavior.

The personal aim is to upstream MSM8956 as much as possible.

This code has been tested on two Sony phones featuring the Qualcomm MSM8956 SoC.

Changes in v2:
- Fixed optional properties placement in documentation

Changes in v3:
- Rebased onto linux-next 01/10/2019
- Added missing SCM commit (required by the AArch64 PT switch support)

Changes in v4:
- Removed rej files from the SCM patch (I'm truly sorry for the noise...)

Angelo G. Del Regno (1):
firmware: qcom: scm: Add function to set IOMMU pagetable addressing

AngeloGioacchino Del Regno (6):
iommu/qcom: Use the asid read from device-tree if specified iommu/qcom: Write TCR before TTBRs to fix ASID access behavior iommu/qcom: Properly reset the IOMMU context
iommu/qcom: Add support for AArch64 IOMMU pagetables iommu/qcom: Index contexts by asid number to allow asid 0 iommu/qcom: Add support for QCIOMMUv2 and QCIOMMU-500 secured contexts

 .../devicetree/bindings/iommu/qcom,iommu.txt  |   5 +
 drivers/firmware/qcom_scm-32.c                |   6 +
 drivers/firmware/qcom_scm-64.c                |  15 ++
 drivers/firmware/qcom_scm.c                   |   7 +
 drivers/firmware/qcom_scm.h                   |   4 +
 drivers/iommu/qcom_iommu.c                    | 134 ++++++++++++++----
 include/linux/qcom_scm.h                      |   2 +
 7 files changed, 145 insertions(+), 28 deletions(-)
Signature · 1 line
2.21.0