Skip to content

mtd: spi-nor: aspeed: fix support for multiple CS on the ast2600

Cédric Le Goater openbmc 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600drivers/mtd/spi-nor/aspeed-smc.c+5 -40 replies
2/3mtd: spi-nor: aspeed: Disable zero size segments on the AST2600drivers/mtd/spi-nor/aspeed-smc.c+6 -20 replies
3/3ARM: dts: aspeed: tacoma: Re-enable CS1arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts+1 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] mtd: spi-nor: aspeed: fix support for multiple CS on the ast2600

Hello,

The ast2600 driver does not set correctly the segment register values when multiple CS are available. This blocks accesses to the CS0 and Linux fails to boot. The series fixes this issue.

Tested on the IBM Tacoma board.

Thanks,

C.

Cédric Le Goater (3):
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
ARM: dts: aspeed: tacoma: Re-enable CS1

 drivers/mtd/spi-nor/aspeed-smc.c            | 17 +++++++++++------
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts |  2 +-
 2 files changed, 12 insertions(+), 7 deletions(-)
Signature · 1 line
2.21.0