Skip to content

Improve PM for omap4 devices

Tony Lindgren linux-arm-kernel linux-omap 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest8 patches 9 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/8ARM: OMAP2+: Remove unused wakeup_cpuarch/arm/mach-omap2/omap-mpuss-lowpower.c+0 -21 reply
2/8ARM: OMAP2+: Drop bogus wkup domain oswr settingarch/arm/mach-omap2/pm44xx.c+1 -22 replies
3/8ARM: OMAP2+: Remove bogus warnings for machines without twl PMICarch/arm/mach-omap2/omap_twl.c+2 -10 replies
4/8ARM: OMAP2+: Update 4430 voltage controller operating pointsarch/arm/mach-omap2/control.h arch/arm/mach-omap2/opp4xxx_data.c+10 -70 replies
5/8ARM: OMAP2+: Configure voltage controller for cpcaparch/arm/mach-omap2/Makefile arch/arm/mach-omap2/omap_twl.c arch/arm/mach-omap2/pm.c +2 more+285 -51 reply
6/8ARM: OMAP2+: Allow per oswr for omap4arch/arm/mach-omap2/pm44xx.c+4 -20 replies
7/8ARM: OMAP2+: Allow core oswr for omap4arch/arm/mach-omap2/pm44xx.c+2 -122 replies
8/8ARM: OMAP2+: Initialize voltage controller for omap4arch/arm/mach-omap2/vc.c+20 -03 replies

Reviews trailers per patch

2 of 8 patches have a Reviewed-by or Acked-by.

PatchPavel Machek
1/8A-b
2/8
3/8
4/8
5/8
6/8
7/8
8/8A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/8] Improve PM for omap4 devices

Hi all,

We've had core oswr (open switch retention) disabled for a while now for omap4 devices because of all kind of GPIO issues it caused with bootloaders that configured per and core LOGICRETSTATE bits.

With all the recent GPIO fixes, these issues are now gone, and we can enable per and core oswr again.

By adding the voltage controller data for droid4, we can get it idle at something like 40 to 50 mW for the whole device with LCD blanked, and USB and modem shut down.

Regards,

Tony

Tony Lindgren (8):
ARM: OMAP2+: Remove unused wakeup_cpu
ARM: OMAP2+: Drop bogus wkup domain oswr setting
ARM: OMAP2+: Remove bogus warnings for machines without twl PMIC
ARM: OMAP2+: Update 4430 voltage controller operating points
ARM: OMAP2+: Configure voltage controller for cpcap
ARM: OMAP2+: Allow per oswr for omap4
ARM: OMAP2+: Allow core oswr for omap4
ARM: OMAP2+: Initialize voltage controller for omap4

 arch/arm/mach-omap2/Makefile              |   5 +
 arch/arm/mach-omap2/control.h             |   1 +
 arch/arm/mach-omap2/omap-mpuss-lowpower.c |   2 -
 arch/arm/mach-omap2/omap_twl.c            |   8 +-
 arch/arm/mach-omap2/opp4xxx_data.c        |  16 +-
 arch/arm/mach-omap2/pm.c                  |   1 +
 arch/arm/mach-omap2/pm.h                  |  14 ++
 arch/arm/mach-omap2/pm44xx.c              |  13 +-
 arch/arm/mach-omap2/pmic-cpcap.c          | 265 ++++++++++++++++++++++
 arch/arm/mach-omap2/vc.c                  |  20 ++
 10 files changed, 319 insertions(+), 26 deletions(-)
 create mode 100644 arch/arm/mach-omap2/pmic-cpcap.c
Signature · 1 line
2.23.0