Skip to content

amlogic: add SEI610 support

Neil Armstrong u-boot u-boot-amlogic 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest8 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/8ARM: meson: add SM1 SoC idarch/arm/mach-meson/board-info.c+2 -00 replies
2/8mmc: meson-gx: add support for mmc-pwrseq-emmcdrivers/mmc/meson_gx_mmc.c+51 -00 replies
3/8clk: meson-sm1: add compatibledrivers/clk/meson/g12a.c+1 -00 replies
4/8ARM: dts: Import SEI610 DT from Linux 5.4-rc2arch/arm/dts/Makefile arch/arm/dts/meson-sm1-sei610.dts arch/arm/dts/meson-sm1.dtsi +1 more+550 -10 replies
5/8ARM: dts: meson-sm1: add U-Boot specific DT for graphicsarch/arm/dts/meson-g12-common-u-boot.dtsi arch/arm/dts/meson-g12a-sei510-u-boot.dtsi arch/arm/dts/meson-g12a-u200-u-boot.dtsi +2 more+10 -30 replies
6/8boards: amlogic: add SEI610 supportboard/amlogic/sei610/MAINTAINERS board/amlogic/sei610/Makefile board/amlogic/sei610/README +2 more+233 -00 replies
6/8boards: amlogic: add SEI610 support+0 -00 replies
7/8configs: sei510: rework header and fix userdata sizeMAINTAINERS include/configs/meson64_android.h include/configs/sei510.h+139 -1190 replies
8/8configs: sei610: Add config file to fix userdata sizeboard/amlogic/sei610/MAINTAINERS configs/sei610_defconfig include/configs/sei610.h+33 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/8] amlogic: add SEI610 support

Add support for the customer board SEI610 manufactured by SEI Robotics with the following specifications:
- Amlogic S905X3 ARM Cortex-A35 quad-core SoC
- 2GB DDR4 SDRAM
- 10/100 Ethernet (Internal PHY)
- 1 x USB 3.0 Host
- 1 x USB Type-C DRD
- 1 x FTDI USB Serial Debug Interface
- eMMC
- SDcard
- Infrared receiver
- SDIO WiFi Module

Like it's SEI510 counterpart, the boot flow is designed to boot Android AOSP built for the Yukawa Android device.

The SM1 SoC is very close to G12A, so it uses the same arm board code and reuses what was pushed for SEI510.

For that it needs to reuse the SEI510 android boot flow into a common flow with custom partitions for each board.

Guillaume La Roque (2):
configs: sei510: rework header and fix userdata size
configs: sei610: Add config file to fix userdata size

Neil Armstrong (6):
ARM: meson: add SM1 SoC id
mmc: meson-gx: add support for mmc-pwrseq-emmc
clk: meson-sm1: add compatible
ARM: dts: Import SEI610 DT from Linux 5.4-rc2
ARM: dts: meson-sm1: add U-Boot specific DT for graphics
boards: amlogic: add SEI610 support

 MAINTAINERS                                   |   1 +
 arch/arm/dts/Makefile                         |   3 +-
 ...boot.dtsi => meson-g12-common-u-boot.dtsi} |   0
 arch/arm/dts/meson-g12a-sei510-u-boot.dtsi    |   2 +-
 arch/arm/dts/meson-g12a-u200-u-boot.dtsi      |   2 +-
 arch/arm/dts/meson-g12b-odroid-n2-u-boot.dtsi |   2 +-
 arch/arm/dts/meson-sm1-sei610-u-boot.dtsi     |   7 +
 arch/arm/dts/meson-sm1-sei610.dts             | 383 ++++++++++++++++++
 arch/arm/dts/meson-sm1.dtsi                   | 147 +++++++
 arch/arm/mach-meson/board-info.c              |   2 +
 board/amlogic/sei610/MAINTAINERS              |   7 +
 board/amlogic/sei610/Makefile                 |   6 +
 board/amlogic/sei610/README                   | 119 ++++++
 board/amlogic/sei610/sei610.c                 |  26 ++
 configs/sei610_defconfig                      |  76 ++++
 drivers/clk/meson/g12a.c                      |   1 +
 drivers/mmc/meson_gx_mmc.c                    |  51 +++
 include/configs/meson64_android.h             | 136 +++++++
 include/configs/sei510.h                      | 121 +-----
 include/configs/sei610.h                      |  31 ++
 include/dt-bindings/power/meson-sm1-power.h   |  18 +
 21 files changed, 1018 insertions(+), 123 deletions(-)
 rename arch/arm/dts/{meson-g12a-u-boot.dtsi => meson-g12-common-u-boot.dtsi} (100%)
 create mode 100644 arch/arm/dts/meson-sm1-sei610-u-boot.dtsi
 create mode 100644 arch/arm/dts/meson-sm1-sei610.dts
 create mode 100644 arch/arm/dts/meson-sm1.dtsi
 create mode 100644 board/amlogic/sei610/MAINTAINERS
 create mode 100644 board/amlogic/sei610/Makefile
 create mode 100644 board/amlogic/sei610/README
 create mode 100644 board/amlogic/sei610/sei610.c
 create mode 100644 configs/sei610_defconfig
 create mode 100644 include/configs/meson64_android.h
 create mode 100644 include/configs/sei610.h
 create mode 100644 include/dt-bindings/power/meson-sm1-power.h
Signature · 1 line
2.22.0