Skip to content

armv8: fsl-layerscape: Allow use of PSCI handlers for ls1088a

Mathew McBride u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2armv8: dts: ls1088a: add PSCI binding for LS1088Aarch/arm/dts/fsl-ls1088a.dtsi+5 -02 replies
1/2armv8: dts: ls1088a: add PSCI binding for LS1088A+0 -01 reply
2/2armv8: fsl-layerscape: do not use layerscape EFI reset if PSCI usedarch/arm/cpu/armv8/fsl-layerscape/cpu.c+1 -11 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/2] armv8: fsl-layerscape: Allow use of PSCI handlers for ls1088a

This patch allows the use of PSCI for power operations - this is desirable if the target board has implemented it's own power operation handlers in Trusted Firmware/EL3.

Layerscape has it's own EFI service handlers for power operations - if PSCI is used the generic handlers will be used instead.

Note that all of the existing Layerscape boards in-tree are blacklisted from PSCI_RESET by default - to use this you must enable it for your board.

Mathew McBride (2):
armv8: dts: ls1088a: add PSCI binding for LS1088A
armv8: fsl-layerscape: do not use layerscape EFI reset if PSCI used

 arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 2 +-
 arch/arm/dts/fsl-ls1088a.dtsi           | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)
Signature · 1 line
2.19.1