Skip to content

dm: add support of new binding in gpio and pincontrol

Patrick Delaunay u-boot 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest21 patches 0 repliesNew
  2. v214 patches 0 repliesSuperseded
  3. v113 patches 0 repliesSuperseded

Changes in v3 from the cover letter

- add test dm_test_ofnode_get_property_by_prop
- udpate ofnode example in commit message
- solve comment for ofnode_get_property_by_prop (and not by of_ofprop)
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/21dm: pinctrl: convert pinctrl-single to livetreedrivers/pinctrl/pinctrl-single.c+9 -183 replies
2/21dm: core: add ofnode and dev function to iterate on node propertydrivers/core/of_access.c drivers/core/ofnode.c drivers/core/read.c +5 more+316 -12 replies
3/21dm: pinctrl: migrate pinctrl-generic to livetreedrivers/pinctrl/pinctrl-generic.c+11 -191 reply
4/21dt-bindings: gpio: document the new pull-up/pull-down flagsdoc/device-tree-bindings/gpio/gpio.txt include/dt-bindings/gpio/gpio.h+30 -02 replies
5/21gpio: remove GPIOD_REQUESTEDinclude/asm-generic/gpio.h+4 -52 replies
6/21gpio: remove the open_drain API and opsarch/sandbox/include/asm/gpio.h drivers/gpio/gpio-uclass.c drivers/gpio/mpc8xxx_gpio.c +3 more+0 -1541 reply
7/21gpio: add gpio descriptor initialization helperdrivers/gpio/gpio-uclass.c+19 -81 reply
8/21gpio: add function _gpio_get_valuedrivers/gpio/gpio-uclass.c+10 -42 replies
9/21gpio: add function _dm_gpio_set_dir_flagsdrivers/gpio/gpio-uclass.c+25 -132 replies
10/21gpio: add function check_dir_flagsdrivers/gpio/gpio-uclass.c+24 -02 replies
11/21gpio: add helper GPIOD_FLAGS_OUTPUTdrivers/gpio/gpio-uclass.c include/asm-generic/gpio.h+9 -62 replies
12/21gpio: update dir_flags managementdrivers/gpio/gpio-uclass.c include/asm-generic/gpio.h+41 -82 replies
13/21gpio: add support of new GPIO direction flagdrivers/gpio/gpio-uclass.c include/asm-generic/gpio.h+35 -12 replies
14/21gpio: add ops to get dir flagsdrivers/gpio/gpio-uclass.c include/asm-generic/gpio.h+40 -62 replies
15/21gpio: add ops to set dir flagsdrivers/gpio/gpio-uclass.c include/asm-generic/gpio.h+28 -52 replies
16/21dt-bindings: gpio: alignment with kernel v5.3doc/README.gpio doc/device-tree-bindings/gpio/gpio.txt+196 -1262 replies
17/21pinctrl: sandbox: Add mux information in get_pin_muxingdrivers/pinctrl/pinctrl-sandbox.c+30 -01 reply
18/21test: dm: update test for pins configuration in pinctrl nodearch/sandbox/dts/test.dts drivers/pinctrl/pinctrl-sandbox.c test/py/tests/test_pinmux.py+56 -111 reply
19/21gpio: sandbox: cleanup binding supportarch/sandbox/dts/test.dts drivers/gpio/sandbox.c include/dt-bindings/gpio/sandbox-gpio.h+42 -91 reply
20/21test: dm: update test for pins configuration in gpioarch/sandbox/dts/test.dts arch/sandbox/include/asm/gpio.h drivers/gpio/sandbox.c +2 more+163 -271 reply
21/21test: pinmux: add pincontrol-gpio for pin configurationarch/sandbox/dts/test.dts drivers/gpio/sandbox.c test/py/tests/test_pinmux.py+231 -221 reply

Reviews trailers per patch

All 21 patches have a Reviewed-by or Acked-by.

PatchSimon Glass
1/21R-b
2/21R-b
3/21R-b
4/21R-b
5/21R-b
6/21R-b
7/21R-b
8/21R-b
9/21R-b
10/21R-b
11/21R-b
12/21R-b
13/21R-b
14/21R-b
15/21R-b
16/21R-b
17/21R-b
18/21R-b
19/21R-b
20/21R-b
21/21R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 00/21] dm: add support of new binding in gpio and pincontrol

Hi,

it is the V3 of "dm: add support of new binding in gpio and pincontrol"
http://patchwork.ozlabs.org/project/uboot/list/?series=145044

I rebase on v2020.01 and made some minor update after Simon Glass review. And I also split the previous patch was part of v2 08/14 to help review

	http://patchwork.ozlabs.org/patch/1200865/
	"gpio: add ops for configuration with dir flags"

I create this patchset to prepare alignment of stm32mp157c-ev1 device-tree with the linux kernel v5.4.

One node for touch screen support use the IRQ line configuration using the new kernel binding introduced by the linux kernel commit ede033e1e863c from v5.1 ('dt-bindings:
gpio: document the new pull-up/pull-down flags')
https://github.com/torvalds/linux/commit/ede033e1e863c

gt9147: goodix_ts at 5d {
	compatible = "goodix,gt9147";
	reg = <0x5d>;
	status = "okay";
	irq-gpios = <&stmfx_pinctrl 14
			(GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
	irq-flags = <IRQ_TYPE_EDGE_RISING>;
};

In Linux Kernel, the GPIO configuration (pull down/up) are now managed by GPIO lib but they are not yet supported by U-boot in uclass GPIO or pincontrol (when used by gpio-hog).

This serie adds the support of theses new defines (with ops get_config/set_config) added in kernel GPIO binding and adds the test in sandbox.

NB: In a second phase, the removed set_open_drain/get_open_drain
API could be replaced by the new ops get_config/set_config.

I also align the gpio binding file with the version from the latest kernel v5.3 (I don't think I remove any U-Boot specific part with this patch)
I move the added information on gpio hog code in a new file doc/README.gpio.

To have functional test, I convert pinctrl-generic to livetree otherwise the pins are not correctly configured in sandbox, when CONFIG_OF_LIVE is activated.

For the test on gpio I add information for pin configuration in output of the command "pinmux status" with a simple pincontrol driver associated to GPIO driver.

NB: after rebase on master branch, the sandbox test "ut dm power_domain"
is failing; it was not the case for v2019.10.

------------------------------------------------------ Captured stdout call ------------------------------------------------------- => ut dm power_domain
Test: dm_test_power_domain: power-domain.c
../test/dm/test-main.c:72, dm_test_destroy(): 0 == uclass_destroy(uc): Expected 0x0 (0), got 0xffffffea (-22) ../test/dm/test-main.c:107, dm_do_test(): 0 == dm_test_destroy(uts): Expected 0x0 (0), got 0x1 (1) ../test/dm/test-main.c:169, dm_test_main(): 0 == dm_do_test(uts, test, 1): Expected 0x0 (0), got 0x1 (1)
=>

I think it is linked to commit 52edfed65de9 ("dm: core:
device: switch off power domain after device removal")

After some investigation :

1/ pincontrol is remove in uclass_destroy(0)

2/ power domain is removed in uclass_destroy(0)

3/ device_chld_unbind()
dev_power_domain_off
-> probe power domain (again)
--> pinctrl_select_state() in device_probe()
---> pincontrol is probed (again)

4/ at the end of dev_power_domain_off() function the power domain
is unbind in dev_power_domain_off device_remove(pd.dev, DM_REMOVE_NORMAL);

So power domain driver is correctly removed but it is not the case for the pincontrol driver and that cause the issue.

The problem occurs after my serie only because I introduce a second pincontrol driver for sandbox, so the dynamic changes but my serie is not the root cause of the issue.

Workaround to allow test execution:
"dm: core: device: don't probe pinctrl for power domain"

My working branch:
https://github.com/patrickdelaunay/u-boot/tree/dm

Regards

Patrick Delaunay

Changes in v3:
- add test dm_test_ofnode_get_property_by_prop
- udpate ofnode example in commit message
- solve comment for ofnode_get_property_by_prop (and not by of_ofprop)
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review
- Split the previous patch [PATCH v2 08/14] to help review

Changes in v2:
- use the dev_ API instead of ofnode_ function.
- Identify property with a new struct ofprop as proposed
by Simon Glass
- Add dev_ iterate functions
- Change dev_ functions in pinctrl-generic
- remove the unused GPIOD_REQUESTED
- remove the open_drain API and ops
- add gpio descriptor initialization helper
- change the proposed ops for pin config to set_dir_flags/get_dir_flags
- reused the existing API dm_gpio_set_dir_flags/dm_gpio_set_dir
- add a new API dm_gpio_get_dir_flags
- change the proposed ops for pin config to set_dir_flags/get_dir_flags
- reused the existing API dm_gpio_set_dir_flags/dm_gpio_set_dir
- add a new API dm_gpio_get_dir_flags
- simplify sandbox GPIO driver: save dir_flags (GPIOD_...) and remove internal flags (GPIOF_...); the previous path "gpio: sandbox: cleanup flag support" is no more needed
- add unitary test in dm_test_gpio for set_dir_flags
- add some function check in dm_test_gpio_phandles
- dm_test_gpio_pin_config change to dm_test_gpio_get_dir_flags
- Adapt sandbox_pinctrl_gpio driver with the saved dir_flags in sandbox gpio driver
- rebase on v2020.01-rc3

Patrick Delaunay (21):
dm: pinctrl: convert pinctrl-single to livetree
dm: core: add ofnode and dev function to iterate on node property
dm: pinctrl: migrate pinctrl-generic to livetree
dt-bindings: gpio: document the new pull-up/pull-down flags
gpio: remove GPIOD_REQUESTED
gpio: remove the open_drain API and ops
gpio: add gpio descriptor initialization helper
gpio: add function _gpio_get_value
gpio: add function _dm_gpio_set_dir_flags
gpio: add function check_dir_flags
gpio: add helper GPIOD_FLAGS_OUTPUT
gpio: update dir_flags management
gpio: add support of new GPIO direction flag
gpio: add ops to get dir flags
gpio: add ops to set dir flags
dt-bindings: gpio: alignment with kernel v5.3
pinctrl: sandbox: Add mux information in get_pin_muxing
test: dm: update test for pins configuration in pinctrl node
gpio: sandbox: cleanup binding support
test: dm: update test for pins configuration in gpio
test: pinmux: add pincontrol-gpio for pin configuration

 arch/sandbox/dts/test.dts               |  85 +++++--
 arch/sandbox/include/asm/gpio.h         |  38 +--
 doc/README.gpio                         |  42 ++++
 doc/device-tree-bindings/gpio/gpio.txt  | 304 ++++++++++++----------
 drivers/core/of_access.c                |  32 +++
 drivers/core/ofnode.c                   |  48 ++++
 drivers/core/read.c                     |  16 ++
 drivers/gpio/gpio-uclass.c              | 203 +++++++++++----
 drivers/gpio/mpc8xxx_gpio.c             |  22 --
 drivers/gpio/sandbox.c                  | 321 +++++++++++++++++++-----
 drivers/pinctrl/pinctrl-generic.c       |  30 +--
 drivers/pinctrl/pinctrl-sandbox.c       |  44 +++-
 drivers/pinctrl/pinctrl-single.c        |  27 +-
 include/asm-generic/gpio.h              | 102 ++++----
 include/dm/of_access.h                  |  40 +++
 include/dm/ofnode.h                     |  63 ++++-
 include/dm/read.h                       |  67 +++++
 include/dt-bindings/gpio/gpio.h         |   6 +
 include/dt-bindings/gpio/sandbox-gpio.h |  24 ++
 test/dm/Makefile                        |   1 +
 test/dm/gpio.c                          |  69 ++++-
 test/dm/ofread.c                        |  50 ++++
 test/dm/test-fdt.c                      |   2 +-
 test/py/tests/test_pinmux.py            |  38 ++-
 24 files changed, 1275 insertions(+), 399 deletions(-)
 create mode 100644 doc/README.gpio
 create mode 100644 include/dt-bindings/gpio/sandbox-gpio.h
 create mode 100644 test/dm/ofread.c
Signature · 1 line
2.17.1