Skip to content

VLAN fixes for Ocelot switch

Vladimir Oltean netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 7 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is updrivers/net/ethernet/mscc/ocelot.c+1 -13 replies
2/2net: mscc: ocelot: refuse to overwrite the port's native vlandrivers/net/ethernet/mscc/ocelot.c+8 -13 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchFlorian FainelliAlexandre BelloniHoratiu Vultur
1/2R-b A-b R-b
2/2R-b A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v1 thread

Cover letter [PATCH net 0/2] VLAN fixes for Ocelot switch

This series addresses 2 issues with vlan_filtering=1:
- Untagged traffic gets dropped unless commands are run in a very specific order.
- Untagged traffic starts being transmitted as tagged after adding another untagged VID on the port.

Tested on NXP LS1028A-RDB board.

Vladimir Oltean (2):
net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before
link is up
net: mscc: ocelot: refuse to overwrite the port's native vlan

 drivers/net/ethernet/mscc/ocelot.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1