Skip to content

net: phy: at803x device tree binding

Michael Walle linux-devicetree lkml netdev 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest6 patches 9 repliesIn review
  2. v15 patches 8 repliesSuperseded

Changes in v2 from the cover letter

- rebased to latest net-next
- renamed "Atheros" to "Qualcomm Atheros"
- add a new patch to remove config_init() from AR9331

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6net: phy: at803x: fix Kconfig descriptiondrivers/net/phy/Kconfig+5 -51 reply
2/6dt-bindings: net: phy: Add support for AT803XDocumentation/devicetree/bindings/net/qca,ar803x.yaml MAINTAINERS include/dt-bindings/net/qca-ar803x.h+126 -01 reply
3/6net: phy: at803x: add device tree bindingdrivers/net/phy/at803x.c+300 -10 replies
4/6net: phy: at803x: mention AR8033 as same as AR8031drivers/net/phy/Kconfig drivers/net/phy/at803x.c+8 -64 replies
5/6net: phy: at803x: fix the PHY namesdrivers/net/phy/at803x.c+9 -91 reply
6/6net: phy: at803x: remove config_init for AR9331drivers/net/phy/at803x.c+0 -21 reply

Reviews trailers per patch

All 6 patches have a Reviewed-by or Acked-by.

PatchFlorian FainelliRob HerringAndrew Lunn
1/6R-b R-b
2/6R-b R-b R-b
3/6R-b
4/6R-b
5/6R-b
6/6R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v2 thread

Cover letter [PATCH v2 0/6] net: phy: at803x device tree binding

Adds a device tree binding to configure the clock and the RGMII voltage.

Changes since v1:
- rebased to latest net-next
- renamed "Atheros" to "Qualcomm Atheros"
- add a new patch to remove config_init() from AR9331

Changes since the RFC:
- renamed the Kconfig entry to "Qualcomm Atheros.." and reordered the item
- renamed the prefix from atheros to qca
- use the correct name AR803x (instead of AT803x) in new files and dt-bindings.
- listed the PHY maintainers in the new schema. Hopefully, thats ok.
- fixed a typo in the bindings schema
- run dtb_checks and dt_binding_check and fixed the schema
- dropped the rgmii-io-1v8 property; instead provide two regulators vddh and vddio, add one consumer vddio-supply
- fix the clock settings for the AR8030/AR8035
- only the AR8031 supports chaning the LDO and the PLL mode in software. Check if we have the correct PHY.
- new patch to mention the AR8033 which is the same as the AR8031 just without PTP support
- new patch which corrects any displayed PHY names and comments. Be consistent.

Michael Walle (6):
net: phy: at803x: fix Kconfig description
dt-bindings: net: phy: Add support for AT803X
net: phy: at803x: add device tree binding
net: phy: at803x: mention AR8033 as same as AR8031
net: phy: at803x: fix the PHY names
net: phy: at803x: remove config_init for AR9331

 .../devicetree/bindings/net/qca,ar803x.yaml   | 111 ++++++
 MAINTAINERS                                   |   2 +
 drivers/net/phy/Kconfig                       |  10 +-
 drivers/net/phy/at803x.c                      | 321 +++++++++++++++++-
 include/dt-bindings/net/qca-ar803x.h          |  13 +
 5 files changed, 441 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/qca,ar803x.yaml
 create mode 100644 include/dt-bindings/net/qca-ar803x.h
Signature · 1 line
2.20.1