Add support for SFPs behind PHYs
Status from this message: I've applied this series to net-next.
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest0 of 3 patches 1 replyApplied
- v10 of 2 patches 0 repliesSuperseded
Patches in v2 Applied
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Rob Herring | Andrew Lunn |
|---|---|---|
| Series | R-b | R-b R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH net-next v2 0/3] Add support for SFPs behind PHYs
This series adds partial support for SFP cages connected to PHYs, specifically optical SFPs.
We add core infrastructure to phylib for this, and arrange for minimal code in the PHY driver - currently, this is code to verify that the module is one that we can support for Marvell 10G PHYs.
v2: add yaml binding patch
.../bindings/net/ethernet-controller.yaml | 5 ++ .../devicetree/bindings/net/ethernet-phy.yaml | 5 ++ drivers/net/phy/marvell10g.c | 25 +++++++- drivers/net/phy/phy.c | 7 +++ drivers/net/phy/phy_device.c | 66 ++++++++++++++++++++++ include/linux/phy.h | 11 ++++ 6 files changed, 118 insertions(+), 1 deletion(-)
Signature · 3 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up