Skip to content

spi: add wakeup handling to SPI core

Dmitry Torokhov linux-devicetree linux-spi lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 10 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2spi: dt-bindings: spi-controller: add wakeup-source and interruptsDocumentation/devicetree/bindings/spi/spi-controller.yaml+23 -010 replies
2/2spi: wire up wakeup-source/wakeirq handlingdrivers/spi/spi.c+26 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] spi: add wakeup handling to SPI core

These patches add wakeup handling for SPI devices to SPI core, mirroring I2C subsystem. Users can mark devices as "wakeup-source" in device tree (or using static device properties) and SPI core will mark the primary interrupt line as wakeirq and mark the device as wakeup enabled.

There is also an option to define a dedicated wake irq.

Dmitry Torokhov (2):
spi: dt-bindings: spi-controller: add wakeup-source and interrupts
spi: wire up wakeup-source/wakeirq handling

 .../bindings/spi/spi-controller.yaml          | 23 ++++++++++++++++
 drivers/spi/spi.c                             | 27 ++++++++++++++++++-
 2 files changed, 49 insertions(+), 1 deletion(-)
Signature · 1 line
2.24.0.rc1.363.gb1bccd3e3d-goog