Configure the MTU on DSA switches
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v4 Latest8 patches 1 replyIn review
- v38 patches 5 repliesSuperseded
- v210 patches 26 repliesSuperseded
Earlier versions · 1
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v1 | 3 patches | 12 replies | Superseded |
Patches in v4 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/8 | net: phy: bcm7xx: add jumbo frame configuration to PHYdrivers/ drivers/ drivers/ +1 more | +29 | 0 replies | |
| 2/8 | bgmac: configure MTU and add support for frames beyond 8192 byte sizedrivers/ drivers/ | +15 | 0 replies | |
| 3/8 | net: dsa: configure the MTU for switch portsinclude/ net/ net/ +3 more | +181 | 0 replies | |
| 4/8 | net: dsa: implement auto-normalization of MTU for bridge hardware datapathinclude/ net/ net/ +1 more | +125 | 0 replies | |
| 5/8 | net: dsa: b53: add MTU configuration supportdrivers/ | +22 | 0 replies | |
| 6/8 | net: dsa: sja1105: implement the port MTU callbacksdrivers/ drivers/ | +47 | 0 replies | |
| 7/8 | net: dsa: vsc73xx: make the MTU configurabledrivers/ | +20 | 0 replies | |
| 8/8 | net: dsa: felix: support changing the MTUdrivers/ drivers/ include/ | +61 | 0 replies |
Reviews trailers per patch
6 of 8 patches have a Reviewed-by or Acked-by.
| Patch | Scott Branden | Florian Fainelli | Arun Parameswaran | Ray Jui |
|---|---|---|---|---|
| 1/8 | R-b | A-b | ||
| 2/8 | R-b | R-b | ||
| 3/8 | ||||
| 4/8 | ||||
| 5/8 | A-b | |||
| 6/8 | R-b | |||
| 7/8 | R-b | |||
| 8/8 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.
Cover letter [PATCH v4 net-next 0/8] Configure the MTU on DSA switches
From: Vladimir Oltean <[email protected]>
This series adds support for configuring the MTU on front-panel switch ports, while seamlessly adapting the CPU port and the DSA master to the largest value plus the tagger overhead.
It also implements bridge MTU auto-normalization within the DSA core, as resulted after the feedback of the implementation of this feature inside the bridge driver in v2.
Support was added for quite a number of switches, in the hope that this series would gain some traction:
- sja1105
- felix
- vsc73xx
- b53 and rest of the platform
V3 of this series was submitted here:
https://patchwork.ozlabs.org/cover/1262394/
V2 of this series was submitted here:
https://patchwork.ozlabs.org/cover/1261471/
V1 of this series was submitted here:
https://patchwork.ozlabs.org/cover/1199868/
Murali Krishna Policharla (3):
net: phy: bcm7xx: add jumbo frame configuration to PHY
bgmac: configure MTU and add support for frames beyond 8192 byte size
net: dsa: b53: add MTU configuration support
Vladimir Oltean (5):
net: dsa: configure the MTU for switch ports
net: dsa: implement auto-normalization of MTU for bridge hardware
datapath
net: dsa: sja1105: implement the port MTU callbacks
net: dsa: vsc73xx: make the MTU configurable
net: dsa: felix: support changing the MTU
drivers/net/dsa/b53/b53_common.c | 27 ++- drivers/net/dsa/ocelot/felix.c | 19 +++ drivers/net/dsa/sja1105/sja1105.h | 1 + drivers/net/dsa/sja1105/sja1105_main.c | 50 +++++- drivers/net/dsa/vitesse-vsc73xx-core.c | 30 ++-- drivers/net/ethernet/broadcom/bgmac.c | 12 ++ drivers/net/ethernet/broadcom/bgmac.h | 5 +- drivers/net/ethernet/mscc/ocelot.c | 45 +++-- drivers/net/phy/bcm-phy-lib.c | 22 +++ drivers/net/phy/bcm-phy-lib.h | 1 + drivers/net/phy/bcm7xxx.c | 4 + include/linux/brcmphy.h | 2 + include/net/dsa.h | 16 ++ include/soc/mscc/ocelot.h | 7 + net/dsa/dsa2.c | 2 +- net/dsa/dsa_priv.h | 15 ++ net/dsa/master.c | 21 +-- net/dsa/port.c | 13 ++ net/dsa/slave.c | 219 ++++++++++++++++++++++++- net/dsa/switch.c | 37 +++++ 20 files changed, 500 insertions(+), 48 deletions(-)
Signature · 1 line
2.17.1