Skip to content

mmc: Add sdhci workaround stability enhencement

Jun Nie linux-block linux-devicetree linux-ide linux-mmc 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 19 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4mmc: sdhci: Add delay after power offdrivers/mmc/host/sdhci.c drivers/mmc/host/sdhci.h+9 -01 reply
2/4mmc: sdhci: dt: Add DMA boundary and HS400 propertiesDocumentation/devicetree/bindings/mmc/sdhci.txt+8 -02 replies
3/4mmc: sdhci: Set ctrl_hs400 value in dtsdrivers/mmc/host/sdhci.c drivers/mmc/host/sdhci.h+13 -21 reply
4/4mmc: sdhci: Add DMA memory boundary workarounddrivers/mmc/host/sdhci.c drivers/mmc/host/sdhci.h+20 -115 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] mmc: Add sdhci workaround stability enhencement

This patch set made three changes:
1. set enhence full power cycle stability.
2. Add dt property to support DMA memory address boundary workaround.
3. Add dt property to non-standard HS400 mode value in ctrl register.

Jun Nie (4):
mmc: sdhci: Add delay after power off
mmc: sdhci: dt: Add DMA boundary and HS400 properties
mmc: sdhci: Set ctrl_hs400 value in dts
mmc: sdhci: Add DMA memory boundary workaround

 .../devicetree/bindings/mmc/sdhci.txt         |  8 +++++
 drivers/mmc/host/sdhci.c                      | 36 +++++++++++++++++--
 drivers/mmc/host/sdhci.h                      |  9 ++++-
 3 files changed, 50 insertions(+), 3 deletions(-)
Signature · 1 line
2.17.1