Skip to content

Fix Tx/Rx FIFO depth for DP83867

Dan Murphy linux-devicetree lkml netdev 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest2 patches 1 replyIn review
  2. v22 patches 3 repliesSuperseded
  3. v12 patches 2 repliesSuperseded

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: dp83867: Convert fifo-depth to common fifo-depth and make optionalDocumentation/devicetree/bindings/net/ti,dp83867.txt+9 -30 replies
2/2net: phy: dp83867: Add rx-fifo-depth and tx-fifo-depthdrivers/net/phy/dp83867.c+49 -130 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH net-next v3 0/2] Fix Tx/Rx FIFO depth for DP83867

Hello

The DP83867 supports both the RGMII and SGMII modes. The Tx and Rx FIFO depths are configurable in these modes but may not applicable for both modes.

When the device is configured for RGMII mode the Tx FIFO depth is applicable and for SGMII mode both Tx and Rx FIFO depth settings are applicable. When the driver was originally written only the RGMII device was available and there were no standard fifo-depth DT properties.

The patchset converts the special ti,fifo-depth property to the standard tx-fifo-depth property while still allowing the ti,fifo-depth property to be set as to maintain backward compatibility.

In addition to this change the rx-fifo-depth property support was added and only written when the device is configured for SGMII mode.

Dan

Dan Murphy (2):
dt-bindings: dp83867: Convert fifo-depth to common fifo-depth and make
optional
net: phy: dp83867: Add rx-fifo-depth and tx-fifo-depth

 .../devicetree/bindings/net/ti,dp83867.txt    | 12 +++-
 drivers/net/phy/dp83867.c                     | 62 +++++++++++++++----
 2 files changed, 58 insertions(+), 16 deletions(-)
Signature · 1 line
2.23.0