Add vTPM emulator support for ppc64 platform
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v7 Latest6 patches 6 repliesIn review
- v64 patches 0 repliesSuperseded
- v55 patches 13 repliesSuperseded
Earlier versions · 2
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v4 | 8 patches | 2 replies | Superseded | |
| v3 | 5 patches | 6 replies | Superseded |
Changes in v7 from the cover letter
- Implemented get_dt_compatible() and using it
- Moved tpm_this_show_buffer to tpm_util.c
Patches in v7 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/6 | tpm: Move tpm_tis_show_buffer to tpm_util.chw/ hw/ hw/ +1 more | +33 | 3 replies | |
| 2/6 | spapr: Implement get_dt_compatible() callbackhw/ include/ | +10 | 0 replies | |
| 3/6 | tpm_spapr: Support TPM for ppc64 using CRQ based interfacehw/ hw/ hw/ +3 more | +403 | 0 replies | |
| 4/6 | tpm_spapr: Support suspend and resumehw/ hw/ | +68 | 2 replies | |
| 5/6 | hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES confighw/ | +1 | 0 replies | |
| 6/6 | docs: tpm: Add example command line for ppc64 and tpm-spaprdocs/ | +19 | 1 reply |
Reviews trailers per patch
2 of 6 patches have a Reviewed-by or Acked-by.
| Patch | David Gibson | Philippe Mathieu-Daudé |
|---|---|---|
| 1/6 | R-b | R-b |
| 2/6 | ||
| 3/6 | R-b | |
| 4/6 | ||
| 5/6 | ||
| 6/6 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v7 0/6] Add vTPM emulator support for ppc64 platform
The following series of patches adds vTPM emulator support for the ppc64 platform (pSeries).
It can be tested as follows with swtpm/libtpms:
mkdir /tmp/mytpm1
swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--log level=20
If TPM 2 is desired, add --tpm2 as parameter to the above.
In another terminal start QEMU:
sudo ./ppc64-softmmu/qemu-system-ppc64 -display sdl \ -machine pseries,accel=kvm \ -m 1024 -bios slof.bin -boot menu=on \ -nodefaults -device VGA -device pci-ohci -device usb-kbd \ -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \ -tpmdev emulator,id=tpm0,chardev=chrtpm \ -device tpm-spapr,tpmdev=tpm0 \ -device spapr-vscsi,id=scsi0,reg=0x00002000 \ -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,id=virtio-disk0 \ -drive file=test.img,format=raw,if=none,id=drive-virtio-disk0
Links:
- libtpms: https://github.com/stefanberger/libtpms/wiki
- swtpm: https://github.com/stefanberger/swtpm/wiki
Changes:
v6->v7:
- Implemented get_dt_compatible() and using it
- Moved tpm_this_show_buffer to tpm_util.c
v5->v6:
- adjusted names of structures and simplified
- only transmitting min. necessary bytes to pass to VM after resume
- addressed other issues pointed out by D. Gibson
v4->v5:
- use runstate_check(RUN_STATE_FINISH_MIGRATE) to check whether devices are suspending; ditch 3 patches in this series that tried to do similar
v3->v4:
- addressed comments to v3
- reworked suspend/resume support that requires extensions to backends
v2->v3:
- patch 1: a TPM 2 is identified by IBM,vtpm20 in the compatible node
- patch 1: convert to tracing to display Tx and Rx buffers
- added documentation patch
- added patch to enable TPM device as part of pSeries
v1->v2:
- followed Cedric Le Goater's suggestions to patch 1
- send appropriate CRQ error responses if DMA read or write fails
- renamed tpm_spapr_got_payload to tpm_spapr_process_cmd and pass endianess-adjusted data pointer from CRQ to it
Regards,
Stefan
Stefan Berger (6):
tpm: Move tpm_tis_show_buffer to tpm_util.c
spapr: Implement get_dt_compatible() callback
tpm_spapr: Support TPM for ppc64 using CRQ based interface
tpm_spapr: Support suspend and resume hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config
docs: tpm: Add example command line for ppc64 and tpm-spapr
docs/specs/tpm.txt | 20 +- hw/ppc/Kconfig | 1 + hw/ppc/spapr_vio.c | 11 +- hw/tpm/Kconfig | 6 + hw/tpm/Makefile.objs | 1 + hw/tpm/tpm_spapr.c | 443 +++++++++++++++++++++++++++++++++++++ hw/tpm/tpm_tis.c | 32 +-- hw/tpm/tpm_util.c | 25 +++ hw/tpm/tpm_util.h | 3 + hw/tpm/trace-events | 16 +- include/hw/ppc/spapr_vio.h | 1 + include/sysemu/tpm.h | 3 + qapi/tpm.json | 6 +- 13 files changed, 533 insertions(+), 35 deletions(-) create mode 100644 hw/tpm/tpm_spapr.c
Signature · 1 line
2.21.0