Skip to content

Ethernet support for Raspberry Pi 4

Andre Przywara u-boot 8 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest posting 2/20 of 3 patches 0 repliesNew
  2. v2 posting 5/50 of 3 patches 0 repliesSuperseded
  3. v3 posting 1/23 patches 0 repliesSuperseded
Earlier versions · 5
VersionPostedPatchesRepliesStatus
v2 posting 4/50 of 3 patches0 repliesSuperseded
v2 posting 3/50 of 3 patches0 repliesSuperseded
v2 posting 2/50 of 3 patches0 repliesSuperseded
v2 posting 1/53 patches0 repliesSuperseded
v13 patches0 repliesSuperseded

Patches in v3 posting 2/2 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/3] Ethernet support for Raspberry Pi 4

On Mon, 27 Jan 2020 12:50:16 +0100
LABBE Corentin <[email protected]> wrote:

Hi,

Quoted 10 lines · Amit Tomer
Quoted 7 lines

Hi,

Quoted 1 line

The kernel panic just after with "OF: reserved mem: failed to allocate memory for node 'linux,cma'" but that's another story.

But this comes even without having Ethernet patches and when one use booti instead of bootefi, right ?

So booti is unsupported on rpi 4 ?

It should be supported, but apparently there is some bug. I guess it's about not properly reserving memory used by the armstub/ATF. Do you use the embedded RPi foundation armstub or ATF (do you have an "armstub=..." line in config.txt)?

I will try take a look at this later.

Quoted 1 line

I need to set a ramdisk and bootefi dont support that.

Try "initrd=<filename>" on the kernel command line.
This is actually an EFI stub feature, the EFI command line is parsed by this pre-kernel code, which filters for initrd= and loads the initrd using the UEFI API (implemented by U-Boot). So the initrd has to live on the EFI system partition, which means you can't load it easily via TFTP :-(
More details here: https://www.kernel.org/doc/html/latest/admin-guide/efi-stub.html#the-initrd-option

Cheers,
Andre