Add SR-IOV support in PCIe Endpoint Core
Status from this message: Applied to pci/endpoint, thanks!
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
Earlier versions · 6
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v6 | 7 patches | 6 replies | Superseded | |
| v5 | 7 patches | 1 reply | Superseded | |
| v4 | 7 patches | 1 reply | Superseded | |
| v3 | 7 patches | 1 reply | Superseded | |
| v2 | 6 patches | 1 reply | Superseded | |
| v1 | 7 patches | 2 replies | Superseded |
Changes in v9 from the cover letter
1) Include pci-epf.h in pcie-cadence.h and use BAR_4 instead of 4
2) Get reg for configuring BAR using if..else.. for physical function and virtual function instead of over-writing reg for virtual function.
Patches in v9 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/8 | dt-bindings: PCI: pci-ep: Add binding to specify virtual functionDocumentation/ | +7 | 0 replies | |
| 2/8 | PCI: endpoint: Add support to add virtual function in endpoint coredrivers/ drivers/ include/ | +113 | 0 replies | |
| 3/8 | PCI: endpoint: Add support to link a physical function to a virtual functiondrivers/ | +24 | 0 replies | |
| 4/8 | PCI: endpoint: Add virtual function number in pci_epc opsdrivers/ drivers/ drivers/ +6 more | +328 | 0 replies | |
| 5/8 | PCI: cadence: Simplify code to get register base address for configuring BARdrivers/ drivers/ | +7 | 0 replies | |
| 6/8 | PCI: cadence: Add support to configure virtual functionsdrivers/ drivers/ | +128 | 0 replies | |
| 7/8 | misc: pci_endpoint_test: Populate sriov_configure ops to configure SR-IOV devicedrivers/ | +1 | 0 replies | |
| 8/8 | Documentation: PCI: endpoint/pci-endpoint-cfs: Guide to use SR-IOVDocumentation/ | +11 | 0 replies |
Reviews trailers per patch
1 of 8 patches has a Reviewed-by or Acked-by.
| Patch | Rob Herring |
|---|---|
| 1/8 | R-b |
| 2/8 | |
| 3/8 | |
| 4/8 | |
| 5/8 | |
| 6/8 | |
| 7/8 | |
| 8/8 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v9 0/8] Add SR-IOV support in PCIe Endpoint Core
Patch series
*) Adds support to add virtual functions to enable endpoint controller
which supports SR-IOV capability
*) Add support in Cadence endpoint driver to configure virtual functions *) Enable pci_endpoint_test driver to create pci_device for virtual
functions
v1 of the patch series can be found at [1]
v2 of the patch series can be found at [2]
v3 of the patch series can be found at [3]
v4 of the patch series can be found at [4]
v5 of the patch series can be found at [5]
v6 of the patch series can be found at [6]
v7 of the patch series can be found at [7]
v8 of the patch series can be found at [8]
Here both physical functions and virtual functions use the same pci_endpoint_test driver and existing pcitest utility can be used to test virtual functions as well.
Changes from v8:
1) Include pci-epf.h in pcie-cadence.h and use BAR_4 instead of 4
2) Get reg for configuring BAR using if..else.. for physical function and virtual function instead of over-writing reg for virtual function.
Changes from v7:
1) Added conditional operator to consicely write code to configure BAR (Added a new patch to first simplify configuring BAR for physical function)
2) Return error if virtual function number is > 1 for configuring config space header
Changes from v6:
*) Rebased to 5.14-rc4
Changes from v5:
*) Rebased to 5.13-rc1
Changes from v4:
*) Added a fix in Cadence driver which was overwriting BAR configuration
of physical function.
*) Didn't include Tom's Acked-by since Cadence driver is modified in
this revision.
Changes from v3:
*) Fixed Rob's comment and added his Reviewed-by as suggested by him.
Changes from v2:
*) Fixed DT binding documentation comment by Rob
*) Fixed the error check in pci-epc-core.c
Changes from v1:
*) Re-based and Re-worked to latest kernel 5.10.0-rc2+ (now has generic
binding for EP)
[1] -> http://lore.kernel.org/r/[email protected]
[2] -> http://lore.kernel.org/r/[email protected]
[3] -> https://lore.kernel.org/r/[email protected]
[4] -> http://lore.kernel.org/r/[email protected]
[5] -> https://lore.kernel.org/r/[email protected]
[6] -> http://lore.kernel.org/r/[email protected]
[7] -> https://lore.kernel.org/r/[email protected]
[8] -> https://lore.kernel.org/r/[email protected]
Kishon Vijay Abraham I (8):
dt-bindings: PCI: pci-ep: Add binding to specify virtual function
PCI: endpoint: Add support to add virtual function in endpoint core
PCI: endpoint: Add support to link a physical function to a virtual
function
PCI: endpoint: Add virtual function number in pci_epc ops
PCI: cadence: Simplify code to get register base address for
configuring BAR
PCI: cadence: Add support to configure virtual functions
misc: pci_endpoint_test: Populate sriov_configure ops to configure
SR-IOV device
Documentation: PCI: endpoint/pci-endpoint-cfs: Guide to use SR-IOV
.../PCI/endpoint/pci-endpoint-cfs.rst | 12 +- .../devicetree/bindings/pci/pci-ep.yaml | 7 + drivers/misc/pci_endpoint_test.c | 1 + .../pci/controller/cadence/pcie-cadence-ep.c | 196 +++++++++++++----- drivers/pci/controller/cadence/pcie-cadence.h | 12 ++ .../pci/controller/dwc/pcie-designware-ep.c | 36 ++-- drivers/pci/controller/pcie-rcar-ep.c | 19 +- drivers/pci/controller/pcie-rockchip-ep.c | 18 +- drivers/pci/endpoint/functions/pci-epf-ntb.c | 89 ++++---- drivers/pci/endpoint/functions/pci-epf-test.c | 74 ++++--- drivers/pci/endpoint/pci-ep-cfs.c | 24 +++ drivers/pci/endpoint/pci-epc-core.c | 134 ++++++++---- drivers/pci/endpoint/pci-epf-core.c | 146 ++++++++++++- include/linux/pci-epc.h | 57 ++--- include/linux/pci-epf.h | 16 +- 15 files changed, 616 insertions(+), 225 deletions(-)
Signature · 7 lines
2.17.1 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip