sunxi: R40: Enable USB and Ethernet
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest4 patches 0 repliesNew
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/4 | sunxi: dts: R40: Update Bananapi M2 Berry .dtsarch/ | +120 | 1 reply | |
| 2/4 | sunxi: defconfig: Bananapi M2 Berry: enable Ethernetconfigs/ | +2 | 0 replies | |
| 3/4 | phy: sun4i-usb: Add Allwinner R40 supportarch/ drivers/ | +13 | 0 replies | |
| 4/4 | sunxi: defconfig: R40 boards: enable USBconfigs/ configs/ | +8 | 0 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/4] sunxi: R40: Enable USB and Ethernet
This series enables the USB ports on boards with the Allwinner R40 SoC, also updates the Bananapi M2 Berry board support.
Patch 1/4 updates the M2 Berry .dts file, so that we get the USB and Ethernet nodes that we need to enable Ethernet in patch 2/4. Patch 3/4 adds support for the USB PHY in the R40 SoC, so that the final patch can enable USB for the two R40 boards that U-Boot supports.
Tested on the Bananapi M2 Berry. I don't have the M2 Ultra, but USB should work there with this series too. Ethernet was already enabled.
Cheers,
Andre.
Andre Przywara (4):
sunxi: dts: R40: Update Bananapi M2 Berry .dts
sunxi: defconfig: Bananapi M2 Berry: enable Ethernet
phy: sun4i-usb: Add Allwinner R40 support
sunxi: defconfig: R40 boards: enable USB
arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 135 ++++++++++++++++++++++++--- arch/arm/mach-sunxi/Kconfig | 1 + configs/Bananapi_M2_Ultra_defconfig | 4 + configs/bananapi_m2_berry_defconfig | 6 ++ drivers/phy/allwinner/phy-sun4i-usb.c | 12 +++ 5 files changed, 143 insertions(+), 15 deletions(-)
Signature · 1 line
2.14.5