Skip to content

ARM: dts: sun8i: R40: DT fixes and updates

Andre Przywara linux-arm-kernel linux-devicetree lkml 1 version Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 8 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/3ARM: dts: sun8i: R40: Upgrade GICC reg size to 8Karch/arm/boot/dts/sun8i-r40.dtsi+1 -11 reply
2/3ARM: dts: sun8i: R40: Add PMU nodearch/arm/boot/dts/sun8i-r40.dtsi+13 -41 reply
3/3ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxesarch/arm/boot/dts/sun8i-r40.dtsi+89 -06 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] ARM: dts: sun8i: R40: DT fixes and updates

Hi,

some changes I made to the R40 .dtsi when playing around with a Bananapi M2 Berry board:
- The GICC region is wrongly reported as 4K only, preventing KVM from using its VGIC emulation.
- The PMU node is missing, similar story as with the other SoCs: this time the SPI numbers are not even mentioned in the manual.
- I hooked up a SPI flash to the PortC SPI0 header pins (from which the board can even boot from). So patch 3 adds the SPI nodes and its pinmux setup, in case people need this for their peripherals.

Please have a look and apply!

Cheers,
Andre.

Andre Przywara (3):
ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K
ARM: dts: sun8i: R40: Add PMU node
ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes

 arch/arm/boot/dts/sun8i-r40.dtsi | 108 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 103 insertions(+), 5 deletions(-)
Signature · 1 line
2.14.5