Skip to content

spl: fit: don't load the firmware twice

Tom Rini u-boot 1 version New

Get series with b4
b4 am 20200108201038.GQ31026@bill-the-cat

Versions newest first

  1. v6 Latest13 patches 0 repliesNew

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/13spl: fit: don't load the firmware twice+0 -00 replies
2/13spl: fit: Add support for applying DT overlay+0 -00 replies
3/13spl: fit: Make room in the FDT before applying overlays+0 -00 replies
4/13spl: fit: allocate a temporary buffer to load the overlays+0 -00 replies
5/13spl: fit: Do not fail immediately if an overlay is not available+0 -00 replies
6/13spl: fit: be more verbose when an error occurs when applying the overlays+0 -00 replies
7/13Makefile.lib: include /__symbols__ in dtb if SPL_LOAD_FIT_APPLY_OVERLAY is enabled+0 -00 replies
8/13spl: fit: constify the output parameter of spl_fit_get_image_name()+0 -00 replies
9/13drivers: board: Make the board drivers available in SPL+0 -00 replies
10/13drivers: board: Add get_fit_loadable()+0 -00 replies
11/13include: board: provide empty stubs when the BOARD option is not selected+0 -00 replies
12/13dts: Add support for adding DT overlays in u-boot.img+0 -00 replies
13/13spl: fit: Allow the board to tell if more images must be loaded from FIT+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v6 yet.

Read the v6 thread