Skip to content

Rate adaptation for Felix DSA switch

Vladimir Oltean netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2net: dsa: felix: Handle PAUSE RX regardless of AN resultdrivers/net/dsa/ocelot/felix.c+6 -23 replies
2/2net: dsa: felix: Allow PHY to AN 10/100/1000 with 2500 serdes linkdrivers/net/dsa/ocelot/felix.c+4 -50 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH net-next 0/2] Rate adaptation for Felix DSA switch

When operating the MAC at 2.5Gbps (2500Base-X and USXGMII/QSXGMII) and in combination with certain PHYs, it is possible that the copper side may operate at lower link speeds. In this case, it is the PHY who has a MAC inside of it that emits pause frames towards the switch's MAC, telling it to slow down so that the transmission is lossless.

These patches are the support needed for the switch side of things to work.

Alex Marginean (2):
net: dsa: felix: Handle PAUSE RX regardless of AN result
net: dsa: felix: Allow PHY to AN 10/100/1000 with 2500 serdes link

 drivers/net/dsa/ocelot/felix.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
Signature · 1 line
2.17.1