RFC arm: Restore minimal support for ST-Ericsson U8500 SoC
Get series with b4
b4 am [email protected]Versions newest first
- v1 RFC Latest0 of 5 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 5 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [RFC PATCH 0/5] arm: Restore minimal support for ST-Ericsson U8500 SoC
Quoted 28 lines · Tom Rini
Quoted 27 lines · Stephan Gerhold
Hi Tom,
Quoted 23 lines · Stephan Gerhold
This patch series restores minimal U-Boot support for the ST-Ericsson NovaThor U8500 SoC.
Previous support for U8500 was removed in
commit68282f55b846("arm: Remove unused ST-Ericsson u8500 arch") since none of the boards were converted to generic boards before the deadline.The motivation for adding the SoC and board is explained in
- Patch 3 ("arm: Add support for ST-Ericsson U8500 SoC") and
- Patch 5 ("board: Add new Samsung "stemmy" board based on ST-Ericsson U8500")I have additional patches for MMC, USB, display and the "stemmy" board, that configure it to provide an Android fastboot interface with similar functionality as the original Samsung bootloader. Some of the patches require some additional work, so I thought it is easier to start with some minimal changes first (only UART).
I think this makes the patch series quite straightforward, with only ~225 new lines of C code, plus device tree and documentation. The only patch that stands out with ~1.8k lines is the device tree import, directly copied (without modification) from the Linux kernel.
Quoted 6 lines
Quoted 3 lines
Since we are approaching the end of the merge window,
I was wondering if there is anything I can do to get this patch set applied for v2020.04?Since you had marked it as RFC, I had marked it as such in patchwork and overlooked it. I'll take a look soon, thanks.
Thank you! I thought marking it as RFC is appropriate since I'm adding a new SoC and this is my first U-Boot patch. But it is working fine, so unless there are comments it should be good to go :)
Thanks,
Stephan