Skip to content

arm: xea: Enhancements for i.MX28 based XEA board

Lukasz Majewski u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5arm: xea: defconfig: Define space for redundant envs in SPI-NOR flashconfigs/imx28_xea_defconfig+2 -01 reply
2/5arm: xea: Provide function to set L2 switch 'local-mac-address' propertyboard/liebherr/xea/xea.c+32 -01 reply
3/5arm: xea: config: Enable support for XEA board specific device tree tweaksconfigs/imx28_xea_defconfig+1 -01 reply
4/5arm: xea: spl: Add GPIO0_0 setup on spl_board_initboard/liebherr/xea/xea.c+16 -11 reply
5/5arm: xea: dts: Add 'fec-3v3' regulator properties to prevent accidental disablementarch/arm/dts/imx28-xea.dts+2 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/5] arm: xea: Enhancements for i.MX28 based XEA board

This patch set provides some enhancements for i.MX28 based XEA board. The most notably one is the ethaddr setup for L2 switch based design and the code to very early enable fec regulator.

Lukasz Majewski (5):
arm: xea: defconfig: Define space for redundant envs in SPI-NOR flash
arm: xea: Provide function to set L2 switch 'local-mac-address'
property
arm: xea: config: Enable support for XEA board specific device tree
tweaks
arm: xea: spl: Add GPIO0_0 setup on spl_board_init
arm: xea: dts: Add 'fec-3v3' regulator properties to prevent
accidental disablement

 arch/arm/dts/imx28-xea.dts  |  2 ++
 board/liebherr/xea/xea.c    | 49 ++++++++++++++++++++++++++++++++++++-
 configs/imx28_xea_defconfig |  3 +++
 3 files changed, 53 insertions(+), 1 deletion(-)
Signature · 1 line
2.20.1