Skip to content

Support the Allwinner F1C100s USB stack

George Hilliard linux-usb lkml 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest5 patches 0 repliesNew
  2. v1 posting 2/25 patches 7 repliesSuperseded
  3. v1 posting 1/25 patches 0 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5dt-bindings: Add new F1C100s compatible strings for USBDocumentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml+2 -00 replies
2/5phy: sun4i-usb: add support for the USB PHY on suniv SoCdrivers/phy/allwinner/phy-sun4i-usb.c+10 -00 replies
3/5musb: sunxi: add support for the suniv MUSB controllerdrivers/usb/musb/sunxi.c+6 -20 replies
4/5ARM: suniv: add USB-related device nodesarch/arm/boot/dts/suniv-f1c100s.dtsi+29 -00 replies
5/5ARM: suniv: f1c100s: enable USB on Lichee Pi Nanoarch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts+16 -00 replies

Reviews trailers per patch

2 of 5 patches have a Reviewed-by or Acked-by.

PatchChen-Yu Tsai
1/5A-b
2/5
3/5A-b
4/5
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/5] Support the Allwinner F1C100s USB stack

The Allwinner F1C100s has an MUSB-based USB peripheral. This patch series implements support for it alongside existing Allwinner support code.

This series was originally written by Icenowy Zheng for Linux v4.14. I've rebased and bugfixed that work against mainline and tested it on both the Lichee Nano and my custom hardware. Where I've made functional changes, I have changed the commit author to myself.

This is a follow-up to the previous series [1], a little late on my self-imposed schedule but here nonetheless.

[1]: https://patchwork.kernel.org/cover/11428003/

George Hilliard (2):
dt-bindings: Add new F1C100s compatible strings for USB
musb: sunxi: add support for the suniv MUSB controller

Icenowy Zheng (3):
phy: sun4i-usb: add support for the USB PHY on suniv SoC
ARM: suniv: add USB-related device nodes
ARM: suniv: f1c100s: enable USB on Lichee Pi Nano

 .../phy/allwinner,sun4i-a10-usb-phy.yaml      |  1 +
 .../usb/allwinner,sun4i-a10-musb.yaml         |  1 +
 .../boot/dts/suniv-f1c100s-licheepi-nano.dts  | 16 ++++++++++
 arch/arm/boot/dts/suniv-f1c100s.dtsi          | 29 +++++++++++++++++++
 drivers/phy/allwinner/phy-sun4i-usb.c         | 10 +++++++
 drivers/usb/musb/sunxi.c                      |  8 +++--
 6 files changed, 63 insertions(+), 2 deletions(-)
Signature · 1 line
2.26.0