Skip to content

x86/kvm/hyper-v: add support for synthetic

Jon Doron kvm linux-hyperv 12 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v12 Latest6 patches 1 replyIn review
  2. v117 patches 14 repliesSuperseded
  3. v107 patches 6 repliesSuperseded
Earlier versions · 9
VersionPostedPatchesRepliesStatus
v96 patches5 repliesSuperseded
v85 patches3 repliesSuperseded
v75 patches0 repliesSuperseded
v65 patches4 repliesSuperseded
v55 patches3 repliesSuperseded
v45 patches12 repliesSuperseded
v35 patches4 repliesSuperseded
v24 patches10 repliesSuperseded
v13 patches5 repliesSuperseded

Changes in v12 from the cover letter

- Rebased on latest origin/master
- Make the KVM_CAP_HYPERV_SYNDBG always enabled, in previous version userspace was required to explicitly enable the syndbg capability just like with the EVMCS feature.

Patches in v12 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exitDocumentation/virt/kvm/api.rst include/uapi/linux/kvm.h+4 -00 replies
2/6x86/hyper-v: Add synthetic debugger definitionsarch/x86/include/asm/hyperv-tlfs.h arch/x86/kvm/hyperv.h+33 -00 replies
3/6x86/kvm/hyper-v: Add support for synthetic debugger capabilityDocumentation/virt/kvm/api.rst arch/x86/include/asm/kvm_host.h arch/x86/kvm/hyperv.c +4 more+260 -30 replies
4/6x86/kvm/hyper-v: enable hypercalls regardless of hypercall pagearch/x86/kvm/hyperv.c+1 -10 replies
5/6x86/kvm/hyper-v: Add support for synthetic debugger via hypercallsarch/x86/kvm/hyperv.c+28 -00 replies
6/6KVM: selftests: update hyperv_cpuid with SynDBG teststools/testing/selftests/kvm/x86_64/hyperv_cpuid.c+56 -470 replies

Reviews trailers per patch

5 of 6 patches have a Reviewed-by or Acked-by.

PatchVitaly KuznetsovMichael Kelley
1/6R-b
2/6R-b
3/6R-b
4/6R-b
5/6R-b
6/6

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v12 thread

Cover letter [PATCH v12 0/6] x86/kvm/hyper-v: add support for synthetic

Add support for the synthetic debugger interface of hyper-v, the synthetic debugger has 2 modes.
1. Use a set of MSRs to send/recv information (undocumented so it's not going to the hyperv-tlfs.h)
2. Use hypercalls

The first mode is based the following MSRs:
1. Control/Status MSRs which either asks for a send/recv .
2. Send/Recv MSRs each holds GPA where the send/recv buffers are.
3. Pending MSR, holds a GPA to a PAGE that simply has a boolean that indicates if there is data pending to issue a recv VMEXIT.

The first mode implementation is to simply exit to user-space when either the control MSR or the pending MSR are being set.
Then it's up-to userspace to implement the rest of the logic of sending/recving.

In the second mode instead of using MSRs KNet will simply issue Hypercalls with the information to send/recv, in this mode the data being transferred is UDP encapsulated, unlike in the previous mode in which you get just the data to send.

The new hypercalls will exit to userspace which will be incharge of re-encapsulating if needed the UDP packets to be sent.

There is an issue though in which KDNet does not respect the hypercall page and simply issues vmcall/vmmcall instructions depending on the cpu type expecting them to be handled as it a real hypercall was issued.

It's important to note that part of this feature has been subject to be removed in future versions of Windows, which is why some of the defintions will not be present the the TLFS but in the kvm hyperv header instead.

v12:
- Rebased on latest origin/master
- Make the KVM_CAP_HYPERV_SYNDBG always enabled, in previous version userspace was required to explicitly enable the syndbg capability just like with the EVMCS feature.

Jon Doron (5):
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit x86/hyper-v: Add synthetic debugger definitions x86/kvm/hyper-v: Add support for synthetic debugger capability x86/kvm/hyper-v: enable hypercalls regardless of hypercall page x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls

Vitaly Kuznetsov (1):
KVM: selftests: update hyperv_cpuid with SynDBG tests

 Documentation/virt/kvm/api.rst                |  18 ++
 arch/x86/include/asm/hyperv-tlfs.h            |   6 +
 arch/x86/include/asm/kvm_host.h               |  13 ++
 arch/x86/kvm/hyperv.c                         | 180 +++++++++++++++++-
 arch/x86/kvm/hyperv.h                         |  32 ++++
 arch/x86/kvm/trace.h                          |  51 +++++
 arch/x86/kvm/x86.c                            |   9 +
 include/uapi/linux/kvm.h                      |  13 ++
 .../selftests/kvm/x86_64/hyperv_cpuid.c       | 103 +++++-----
 9 files changed, 374 insertions(+), 51 deletions(-)
Signature · 1 line
2.24.1