Skip to content

mx6cuboxi: enable support for OF_CONTROL and DM in SPL

Walter Lozano u-boot 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest4 patches 0 repliesNew
  2. v24 patches 0 repliesSuperseded
  3. v14 patches 0 repliesSuperseded

Changes in v3 from the cover letter

- Cleanup

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4mx6cuboxi: enable MMC and eMMC in DT for SPLarch/arm/dts/imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi+8 -01 reply
2/4mx6cuboxi: customize board_boot_order to access eMMCboard/solidrun/mx6cuboxi/mx6cuboxi.c+48 -01 reply
3/4mx6cuboxi: enable OF_CONTROL and DM in SPLconfigs/mx6cuboxi_defconfig+3 -01 reply
4/4mx6cuboxi: remove unused codeboard/solidrun/mx6cuboxi/mx6cuboxi.c+0 -651 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/4] mx6cuboxi: enable support for OF_CONTROL and DM in SPL

Make an additional step to add full DM support to mx6cuboxi, including its support for SPL

With this new configuration SPL image is 50 KB, higher than the 38 KB from the previous version, but it still under the 68 KB limit.

Changes in v3:
- Cleanup

Changes in v2:
- Fix board_boot_order to avoid pointing to a NAND device
- Fix board_boot_order to include MMC iomux
- Remove unused code

Walter Lozano (4):
mx6cuboxi: enable MMC and eMMC in DT for SPL
mx6cuboxi: customize board_boot_order to access eMMC
mx6cuboxi: enable OF_CONTROL and DM in SPL
mx6cuboxi: remove unused code

 ...qdl-hummingboard2-emmc-som-v15-u-boot.dtsi |   8 ++
 board/solidrun/mx6cuboxi/mx6cuboxi.c          | 113 ++++++++----------
 configs/mx6cuboxi_defconfig                   |   3 +
 3 files changed, 59 insertions(+), 65 deletions(-)
Signature · 1 line
2.20.1