phy: atheros: dt bindings and cleanup
Get series with b4
b4 am 20200506195658.GR12564@bill-the-catVersions newest first · linked by author and title
- v3 Latest0 of 12 patches 0 repliesNew
- v20 of 12 patches 0 repliesSuperseded
Patches in v3 No applies recorded yet
None of the 12 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 00/12] phy: atheros: dt bindings and cleanup
Quoted 55 lines · Michael Walle
Am 2020-05-06 21:14, schrieb Michael Walle:
Quoted 45 lines
This patch series superseeds the following two:
From Vladimir Oltean
https://patchwork.ozlabs.org/cover/1031360/
From me:
https://patchwork.ozlabs.org/cover/1184507/Although the first is marked as accepted into u-boot-net I guess it was removed due to broken boards ("DT as ABI", RGMII delay was fixed and thus
breaks the board).After disussing with Vladimir, I've integrated his patches with this series. Also the first one
Address packet drops at low traffic rate due to SmartEEE feature
was dropped because it will likely be fixed by making u-boot support the eee-broken-X device tree properties. Apart from that, only the subject was
changed and a note about possible board breakage was added the patch which
changes the delay behaviour.For all of those, who will test this patchset, the device tree binding needs the
phydev->nodeproperty, which needs to be set in every network driver. If the device tree binding is not working for you have a look at the
ar803x_of_init: found PHY node: phy at 0
output. In the case above "phy at 0" is the phy node in the device tree. If instead the node of your network device is displayed, you have to set thephydev->nodeproperty in your network device driver.For the
fsl_enetcdriver this patchset will add it:
https://patchwork.ozlabs.org/cover/1188043/changes since v2:
- rebased onto latest master, esp. #include <dm/device_compat.h>changes since v1:
- pull all Vladimirs Oltan's patches and rebase mine onto them
- fix theCLK_25Msettings for the AR8035
- add two new patches "fix AR8021 PHY ID mask" and "use defines for PHY IDs"
- use the new kernel device tree binding for the AR803x PHYs:https://patchwork.ozlabs.org/patch/1188293/- add debugging output
Quoted 8 lines
Michael Walle (7):
phy: atheros: fix AR8021 PHY ID mask
phy: atheros: use defines for PHY IDs
phy: atheros: introduce debug read and write functions
phy: atheros: move delay config to common function
phy: atheros: add device tree bindings and config
phy: atheros: ar8035: remove static clock config
phy: atheros: consolidate {ar8031|ar8035}_config()
Quoted 8 lines
Oh I've actually forgot the "Acked-by:" from Joe from the v2 series.
All but the
Quoted 1 line
phy: atheros: fix AR8021 PHY ID mask
were acked by Joe.
Tom, should I send a v4 where I drop that patch and could you pull this series?
Yes please, sounds like a plan, thanks for the explanation!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200506/cd16110d/attachment.sig>