Skip to content

add phylink support for PCS

Russell King - ARM Linux admin netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 5 patches 5 repliesIn review

Patches in v1 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH net-next 0/5] add phylink support for PCS

Hi,

This series adds support for IEEE 802.3 register set compliant PCS for phylink. In order to do this, we:

1. convert the existing (unused) mii_lpa_to_ethtool_lpa_x() function to a linkmode variant.
2. add a helper for clause 37 advertisements, supporting both the 1000baseX and defacto 2500baseX variants. Note that ethtool does not support half duplex for either of these, and we make no effort to do so.
3. add accessors for modifying a MDIO device register, and use them in phylib, rather than duplicating the code from phylib.
4. add support for decoding the advertisement from clause 22 compatible register sets for clause 37 advertisements and SGMII advertisements.
5. add support for clause 45 register sets for 10GBASE-R PCS.

These have been tested on the LX2160A Clearfog-CX platform.

 drivers/net/phy/mdio_bus.c |  55 +++++++++++
 drivers/net/phy/phy-core.c |  31 ------
 drivers/net/phy/phylink.c  | 236 +++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mdio.h       |   4 +
 include/linux/mii.h        |  57 +++++++----
 include/linux/phy.h        |  19 ++++
 include/linux/phylink.h    |   8 ++
 include/uapi/linux/mii.h   |   5 +
 8 files changed, 366 insertions(+), 49 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up