net: add phylink support for PCS
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest0 of 4 patches 1 replyIn review
- v10 of 3 patches 5 repliesSuperseded
Patches in v2 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Andrew Lunn |
|---|---|
| Series | R-b R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v2 net-next 0/4] net: add phylink support for PCS
This series adds support for IEEE 802.3 register set compliant PCS for phylink. In order to do this, we:
1. convert BUG_ON() in existing accessors to WARN_ON_ONCE() and return an error.
2. add accessors for modifying a MDIO device register, and use them in phylib, rather than duplicating the code from phylib.
3. add support for decoding the advertisement from clause 22 compatible register sets for clause 37 advertisements and SGMII advertisements.
4. add support for clause 45 register sets for 10GBASE-R PCS.
These have been tested on the LX2160A Clearfog-CX platform.
v2: eliminate use of BUG_ON() in the accessors.
drivers/net/phy/mdio_bus.c | 68 ++++++++++++- drivers/net/phy/phy-core.c | 31 ------ drivers/net/phy/phylink.c | 236 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/mdio.h | 4 + include/linux/phy.h | 19 ++++ include/linux/phylink.h | 8 ++ include/uapi/linux/mii.h | 5 + 7 files changed, 336 insertions(+), 35 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up