Skip to content

Add support for Kontron sl28cpld

Michael Walle linux-arm-kernel linux-devicetree linux-gpio linux-hwmon linux-pwm linux-watchdog lkml 10 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v10 Latest13 patches 5 repliesIn review
  2. v913 patches 4 repliesSuperseded
  3. v813 patches 2 repliesSuperseded
Earlier versions · 7
VersionPostedPatchesRepliesStatus
v713 patches9 repliesSuperseded
v613 patches22 repliesSuperseded
v513 patches25 repliesSuperseded
v411 patches60 repliesSuperseded
v316 patches46 repliesSuperseded
v216 patches21 repliesSuperseded
v118 patches21 repliesSuperseded

Changes since v3 from the cover letter

- use of_platform_populate() to populate internal devices using the internal register offsets as unit-addresses
- because we don't use mfd_cells anymore, we cannot use IORESOURCE_REG, but instead parse the reg property in each individual driver
- dropped the following patches because they were already merged:
gpiolib: Introduce gpiochip_irqchip_add_domain()
gpio: add a reusable generic gpio_chip using regmap
- dropped the following patches because they are no longer needed:
include/linux/ioport.h: add helper to define REG resource constructs
mfd: mfd-core: Don't overwrite the dma_mask of the child device
mfd: mfd-core: match device tree node against reg property
- rephrase commit messages, as suggested by Thomas Gleixner

Patches in v10 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/13mfd: add simple regmap based I2C driverdrivers/mfd/Kconfig drivers/mfd/Makefile drivers/mfd/simple-mfd-i2c.c+69 -00 replies
2/13dt-bindings: mfd: Add bindings for sl28cpldDocumentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml +3 more+358 -00 replies
3/13mfd: simple-mfd-i2c: add sl28cpld supportdrivers/mfd/Kconfig drivers/mfd/simple-mfd-i2c.c+11 -00 replies
4/13irqchip: add sl28cpld interrupt controller supportdrivers/irqchip/Kconfig drivers/irqchip/Makefile drivers/irqchip/irq-sl28cpld.c+105 -00 replies
5/13watchdog: add support for sl28cpld watchdogdrivers/watchdog/Kconfig drivers/watchdog/Makefile drivers/watchdog/sl28cpld_wdt.c+241 -00 replies
6/13pwm: add support for sl28cpld PWM controllerdrivers/pwm/Kconfig drivers/pwm/Makefile drivers/pwm/pwm-sl28cpld.c+281 -02 replies
7/13gpio: add support for the sl28cpld GPIO controllerdrivers/gpio/Kconfig drivers/gpio/Makefile drivers/gpio/gpio-sl28cpld.c+174 -00 replies
8/13hwmon: add support for the sl28cpld hardware monitoring controllerDocumentation/hwmon/index.rst Documentation/hwmon/sl28cpld.rst drivers/hwmon/Kconfig +2 more+190 -00 replies
9/13arm64: dts: freescale: sl28: enable sl28cpldarch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts+102 -00 replies
10/13arm64: dts: freescale: sl28: map GPIOs to input eventsarch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts+32 -00 replies
11/13arm64: dts: freescale: sl28: enable LED supportarch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts+18 -01 reply
12/13arm64: dts: freescale: sl28: enable fan supportarch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts+9 -00 replies
13/13arm64: defconfig: enable the sl28cpld board management controllerarch/arm64/configs/defconfig+6 -00 replies

Reviews trailers per patch

7 of 13 patches have a Reviewed-by or Acked-by.

PatchLee JonesPavel MachekGuenter RoeckAndy ShevchenkoLinus WalleijRob HerringThierry RedingMarc ZyngierUwe Kleine-König
1/13Acked-for-MFD-by
2/13R-b
3/13Acked-for-MFD-by
4/13A-b
5/13A-b
6/13A-b R-b
7/13R-b R-b
8/13A-b R-b
9/13
10/13
11/13A-b
12/13
13/13

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 9 reviewers.

Read the v10 thread

Cover letter [PATCH v10 00/13] Add support for Kontron sl28cpld

The Kontron sl28cpld is a board management chip providing gpio, pwm, fan monitoring and an interrupt controller. For now this controller is used on the Kontron SMARC-sAL28 board. But because of its flexible nature, it might also be used on other boards in the future. The individual blocks (like gpio, pwm, etc) are kept intentionally small. The MFD core driver then instantiates different (or multiple of the same) blocks. It also provides the register layout so it might be updated in the future without a device tree change; and support other boards with a different layout or functionalities.

See also [1] for more information.

This is my first take of a MFD driver. I don't know whether the subsystem maintainers should only be CCed on the patches which affect the subsystem or on all patches for this series. I've chosen the latter so you can get a more complete picture.

[1] https://lore.kernel.org/linux-devicetree/[email protected]/

Changes for v4 and above are tracked in the patches, suggested by Lee.

Changes since v3:
- use of_platform_populate() to populate internal devices using the internal register offsets as unit-addresses
- because we don't use mfd_cells anymore, we cannot use IORESOURCE_REG, but instead parse the reg property in each individual driver
- dropped the following patches because they were already merged:
gpiolib: Introduce gpiochip_irqchip_add_domain()
gpio: add a reusable generic gpio_chip using regmap
- dropped the following patches because they are no longer needed:
include/linux/ioport.h: add helper to define REG resource constructs
mfd: mfd-core: Don't overwrite the dma_mask of the child device
mfd: mfd-core: match device tree node against reg property
- rephrase commit messages, as suggested by Thomas Gleixner

Changes since v2:
As suggested by Guenter Roeck:
- added sl28cpld.rst to index.rst
- removed sl28cpld_wdt_status()
- reverse christmas tree local variable ordering
- assign device_property_read_bool() retval directly
- introduce WDT_DEFAULT_TIMEOUT and use it if the hardware reports 0 as timeout.
- set WDOG_HW_RUNNING if applicable
- remove platform_set_drvdata() leftover

As suggested by Bartosz Golaszewski:
- don't export gpio_regmap_simple_xlate()
- combine local variable declaration of the same type
- drop the "struct gpio_regmap_addr", instead use -1 to force an address offset of zero
- fix typo
- use "struct gpio_regmap_config" pattern, keep "struct gpio_regmap" private. this also means we need a getter/setter for the driver_data element.

As suggested by Linus Walleij:
- don't store irq_domain in gpio-regmap. drop to_irq() altogether for now. Instead there is now a new patch which lets us set the irqdomain of the gpiochip_irqchip and use its .to_irq() function. This way we don't have to expose the gpio_chip inside the gpio-regmap to the user.

Changes since v1:
- use of_match_table in all drivers, needed for automatic module loading, when using OF_MFD_CELL()
- add new gpio-regmap.c which adds a generic regmap gpio_chip implementation
- new patch for reqmap_irq, so we can reuse its implementation
- remove almost any code from gpio-sl28cpld.c, instead use gpio-regmap and regmap-irq
- change the handling of the mfd core vs device tree nodes; add a new property "of_reg" to the mfd_cell struct which, when set, is matched to the unit-address of the device tree nodes.
- fix sl28cpld watchdog when it is not initialized by the bootloader. Explicitly set the operation mode.
- also add support for kontron,assert-wdt-timeout-pin in sl28cpld-wdt.

As suggested by Bartosz Golaszewski:
- define registers as hex
- make gpio enum uppercase
- move parent regmap check before memory allocation
- use device_property_read_bool() instead of the of_ version
- mention the gpio flavors in the bindings documentation

As suggested by Guenter Roeck:
- cleanup #includes and sort them
- use devm_watchdog_register_device()
- use watchdog_stop_on_reboot()
- provide a Documentation/hwmon/sl28cpld.rst
- cleaned up the weird tristate->bool and I2C=y issue. Instead mention that the MFD driver is bool because of the following intc patch
- removed the SL28CPLD_IRQ typo

As suggested by Rob Herring:
- combine all dt bindings docs into one patch
- change the node name for all gpio flavors to "gpio"
- removed the interrupts-extended rule
- cleaned up the unit-address space, see above

Michael Walle (13):
mfd: add simple regmap based I2C driver
dt-bindings: mfd: Add bindings for sl28cpld
mfd: simple-mfd-i2c: add sl28cpld support
irqchip: add sl28cpld interrupt controller support
watchdog: add support for sl28cpld watchdog
pwm: add support for sl28cpld PWM controller
gpio: add support for the sl28cpld GPIO controller
hwmon: add support for the sl28cpld hardware monitoring controller
arm64: dts: freescale: sl28: enable sl28cpld
arm64: dts: freescale: sl28: map GPIOs to input events
arm64: dts: freescale: sl28: enable LED support
arm64: dts: freescale: sl28: enable fan support
arm64: defconfig: enable the sl28cpld board management controller

 .../bindings/gpio/kontron,sl28cpld-gpio.yaml  |  54 ++++
 .../hwmon/kontron,sl28cpld-hwmon.yaml         |  27 ++
 .../kontron,sl28cpld-intc.yaml                |  54 ++++
 .../bindings/mfd/kontron,sl28cpld.yaml        | 153 ++++++++++
 .../bindings/pwm/kontron,sl28cpld-pwm.yaml    |  35 +++
 .../watchdog/kontron,sl28cpld-wdt.yaml        |  35 +++
 Documentation/hwmon/index.rst                 |   1 +
 Documentation/hwmon/sl28cpld.rst              |  36 +++
 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts     |  18 ++
 .../fsl-ls1028a-kontron-sl28-var3-ads2.dts    |   9 +
 .../freescale/fsl-ls1028a-kontron-sl28.dts    | 134 +++++++++
 arch/arm64/configs/defconfig                  |   6 +
 drivers/gpio/Kconfig                          |  12 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-sl28cpld.c                  | 161 +++++++++++
 drivers/hwmon/Kconfig                         |  10 +
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/sl28cpld-hwmon.c                | 142 +++++++++
 drivers/irqchip/Kconfig                       |   8 +
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-sl28cpld.c                |  96 +++++++
 drivers/mfd/Kconfig                           |  22 ++
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/simple-mfd-i2c.c                  |  57 ++++
 drivers/pwm/Kconfig                           |  10 +
 drivers/pwm/Makefile                          |   1 +
 drivers/pwm/pwm-sl28cpld.c                    | 270 ++++++++++++++++++
 drivers/watchdog/Kconfig                      |  11 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/sl28cpld_wdt.c               | 229 +++++++++++++++
 30 files changed, 1596 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
 create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
 create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
 create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
 create mode 100644 Documentation/hwmon/sl28cpld.rst
 create mode 100644 drivers/gpio/gpio-sl28cpld.c
 create mode 100644 drivers/hwmon/sl28cpld-hwmon.c
 create mode 100644 drivers/irqchip/irq-sl28cpld.c
 create mode 100644 drivers/mfd/simple-mfd-i2c.c
 create mode 100644 drivers/pwm/pwm-sl28cpld.c
 create mode 100644 drivers/watchdog/sl28cpld_wdt.c
Signature · 1 line
2.20.1