Skip to content

RFC net/mlx5: Failing fw tracer allocation on s390

Niklas Schnelle lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest1 patch 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1net/mlx5: Fix failing fw tracer allocation on s390drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c+3 -31 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC 0/1] net/mlx5: Failing fw tracer allocation on s390

Hi,

on s390 the MLX5 driver generates the following stack trace when initializing a device with support for firmware tracing.

[  331.531813] ------------[ cut here ]------------
[  331.531819] WARNING: CPU: 7 PID: 2156 at mm/page_alloc.c:4727 __alloc_pages_nodemask+0x25c/0x320
[  331.531820] Modules linked in: mlx5_core(+) mlxfw tls ptp pps_core s390_trng chsc_sch vfio_ccw vfio_mdev mdev eadm_sch vfio_iommu_type1 vfio sch_fq_codel ip_tables x_tables btrfs zstd_compress zlib_deflate raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 linear dm_service_time pkey zcrypt crc32_vx_s390 ghash_s390 prng aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 qeth_l2 sha512_s390 sha256_s390 sha1_s390 sha_common zfcp qeth scsi_transport_fc qdio ccwgroup scsi_dh_emc scsi_dh_rdac scsi_dh_alua dm_multipath
[  331.531833] CPU: 7 PID: 2156 Comm: systemd-udevd Not tainted 5.4.0-14-generic #17-Ubuntu
[  331.531833] Hardware name: IBM 8562 GT2 A00 (LPAR)
[  331.531834] Krnl PSW : 0704c00180000000 00000000735d720c (__alloc_pages_nodemask+0x25c/0x320)
[  331.531836]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
[  331.531837] Krnl GPRS: 000000007418d687 0000000000040dc0 0000000000040dc0 000000000000000a
[  331.531837]            0000000000000000 0000000000000000 000000000000000a 000003ff8042607e
[  331.531838]            0000000000000dc0 00000000002203b0 000000000000000a 00000001c9480120
[  331.531838]            00000001ecda4400 0000000000000055 000003e001943680 000003e001943600
[  331.531844] Krnl Code: 00000000735d7200: a7212000            tmll    %r2,8192
		      00000000735d7204: a774ff87            brc     7,00000000735d7112
		     #00000000735d7208: a7f40001            brc     15,00000000735d720a
		     >00000000735d720c: a7890000            lghi    %r8,0
		      00000000735d7210: a7f4ff83            brc     15,00000000735d7116
		      00000000735d7214: a7180000            lhi     %r1,0
		      00000000735d7218: a7f4ff1b            brc     15,00000000735d704e
		      00000000735d721c: e31003400004        lg      %r1,832
[  331.531851] Call Trace:
[  331.531852] ([<0000000000000201>] 0x201)
[  331.531856]  [<00000000735a20c4>] kmalloc_order+0x34/0xb0
[  331.531856]  [<00000000735a2172>] kmalloc_order_trace+0x32/0xe0
[  331.531880]  [<000003ff8042607e>] mlx5_fw_tracer_create+0x3e/0x500 [mlx5_core]
[  331.531899]  [<000003ff803ffa88>] mlx5_init_once+0x148/0x3c0 [mlx5_core]
[  331.531917]  [<000003ff8040152a>] mlx5_load_one+0x7a/0x240 [mlx5_core]
[  331.531935]  [<000003ff804018d8>] init_one+0x1e8/0x310 [mlx5_core]
[  331.531939]  [<0000000073916e16>] local_pci_probe+0x56/0xc0
[  331.531941]  [<0000000073917ef2>] pci_device_probe+0x132/0x1e0
[  331.531942]  [<00000000739a1374>] really_probe+0xf4/0x460
[  331.531943]  [<00000000739a1a60>] driver_probe_device+0x130/0x190
[  331.531944]  [<00000000739a1dae>] device_driver_attach+0x7e/0xa0
[  331.531945]  [<00000000739a1e86>] __driver_attach+0xb6/0x180
[  331.531947]  [<000000007399eae2>] bus_for_each_dev+0x82/0xc0
[  331.531948]  [<00000000739a030a>] bus_add_driver+0x16a/0x260
[  331.531949]  [<00000000739a2b38>] driver_register+0x88/0x150
[  331.531967]  [<000003ff80362080>] init+0x80/0xb0 [mlx5_core]
[  331.531968]  [<00000000733648bc>] do_one_initcall+0x3c/0x200
[  331.531970]  [<0000000073495fc0>] do_init_module+0x70/0x270
[  331.531970]  [<00000000734983b2>] load_module+0x1142/0x1440
[  331.531971]  [<00000000734988e4>] __do_sys_finit_module+0xa4/0xf0
[  331.531973]  [<0000000073c54ec2>] system_call+0x2a6/0x2c8
[  331.531974] Last Breaking-Event-Address:
[  331.531975]  [<00000000735d7208>] __alloc_pages_nodemask+0x258/0x320
[  331.531975] ---[ end trace 5985b580c6dbfd3e ]---

This is because on s390 FORCE_MAX_ZONEORDER is 9 instead of 11, such a large kzalloc() allocation will thus always fail. As the tracer is a debug feature and failing allocations are checked the device is usable however.

Looking at mlx5_fw_tracer_save_trace() I would think that since it is actually the driver not the device that copies into the trace array we can just use kvzalloc() instead. This patch prevents the above stack trace for us, though

I haven't yet been able to test the tracing as the devlink command given in the initial commit fd1483fe1f9f ("net/mlx5: Add support for FW reporter dump") always reports 'Object "health" not found' for me even after enabling it via

echo traceon > /sys/kernel/debug/tracing/events/mlx5/mlx5_fw/enable

Still I wanted to get your comments on the proposed fix and maybe a hint at how to test this.

Best regards,
Niklas Schnelle

Niklas Schnelle (1):
net/mlx5: Fix failing fw tracer allocation on s390

 drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
Signature · 1 line
2.17.1