ASoC: ti: Add support for audio on J721e EVM
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v4 Latest3 patches 1 replyIn review
- v33 patches 3 repliesSuperseded
- v23 patches 5 repliesSuperseded
Earlier versions · 1
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v1 | 3 patches | 2 replies | Superseded |
Changes in v4 from the cover letter
- Fix the single clock source handling and typo
Patches in v4 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | ASoC: ti: davinci-mcasp: Specify stream_name for playback/capturesound/ | +3 | 0 replies | |
| 2/3 | ASoC: dt-bindings: Add documentation for TI j721e EVM (CPB and IVI)Documentation/ Documentation/ | +245 | 0 replies | |
| 3/3 | ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)sound/ sound/ sound/ | +906 | 0 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.
Cover letter [PATCH v4 0/3] ASoC: ti: Add support for audio on J721e EVM
Hi,
Changes since v3:
- Fix the single clock source handling and typo
Changes since v2:
- DT binding:
- use proper (?) patch subject for the binding docuemtn patch
- drop pll4 and pll15 from DT - driver should check the rate via clk_get_parent. If it is not available (as it is not currently) then use the match_data provided rates.
- add simple explanation for the clocking setup
- Use descriptive names for clocks: cpb/ivi-mcasp-auxclk and cpb/ivi-codec-scki
- dt_binding_check shows no errors/warnings
- ASoC machine driver:
- Try to read the PLL4/15 rate with clk API (parent of the two clock divider) if it is not available then use the match_data provided numbers.
- Support for single PLL setup
Changes since v1:
- Fixed DT binding documentation errors
- Rebased on ASoC head and updated the driver to compile and work
This series adds support for the analog audio setup on the j721e EVM. The audio setup of the EVM is:
Common Processor Board (CPB): McASP10 <-> pcm3168a Infotainment Expansion Board (IVI): McASP0 <-> 2x pcm3168a
Both CPB and IVI wired in parallel serializer setup.
The first patch adds the stream_name for McASP driver as it is needed in multicodec (and would be needed in DPCM) setup for proper DAPM handling.
The second patch adds two DT schema, one for the cpb and one for the cpb+ivi card.
Regards,
Peter
---
Peter Ujfalusi (3):
ASoC: ti: davinci-mcasp: Specify stream_name for playback/capture
ASoC: dt-bindings: Add documentation for TI j721e EVM (CPB and IVI)
ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)
.../bindings/sound/ti,j721e-cpb-audio.yaml | 95 ++ .../sound/ti,j721e-cpb-ivi-audio.yaml | 150 +++ sound/soc/ti/Kconfig | 8 + sound/soc/ti/Makefile | 2 + sound/soc/ti/davinci-mcasp.c | 3 + sound/soc/ti/j721e-evm.c | 896 ++++++++++++++++++ 6 files changed, 1154 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml create mode 100644 sound/soc/ti/j721e-evm.c
Signature · 4 lines
Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki