usb: Improve robustness of ehci-hcd controller operation
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest5 patches 0 repliesNew
Patches in v1 No applies recorded yet
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [RFT PATCH v1 0/5] usb: Improve robustness of ehci-hcd controller operation
This patch set is rather a request for testing (and a starting point for the discussion), as it may improve the robustness of USB with some pendrives - and yes sacrifice some performance for reliability.
The previous version of this patch: https://patchwork.ozlabs.org/patch/1244928/
fixed issue for some network USB adapters and improved stability on TI boards. This patch also provides very detailed explanation of the problem in the commit message.
With the async support patch applied (
SHA1: 02b0e1a36c5bc20174299312556ec4e266872bd6 ), the qhtoken variable has value 0x00 when token shows errors. As a result the error handling path is not executed. This looks like some missing/broken cache flushing - for easier bisecting this patch has been reverted for now
Test setup:
===========
Data:
VFAT on the pendrive
16MiB FitImage on USB pen drive (to be read in U-Boot) 400 MiB recovery image (but not read)
Pen drives:
-----------
1. ID 0930:6544 Toshiba Corp. TransMemory-Mini / Kingston DataTraveler 2.0 Stick
2. ID 21c4:8005 GOODRAM 8GB
HW:
---
IMX6Q -> TPC70 board
Procedure:
----------
Boot U-Boot, execute: loadusb=usb start; fatload usb 0 ${loadaddr} ${upd_image} (Then the image has been crafted to OOPs and WDT after 4 seconds causes reset). When we fail - the "normal" execution path is followed and we boot up till prompt.
Results:
========
1. Current mainline - SHA1: 63b2ef407de2f0997deef3b54b7e7ab9c7a7cb27
- The USB error (EHCI timed out on TD - token=0x80008d80) is present after ~10 minutes - pendrive [1]
- Error after a few minutes (1,2) - pendrive [2]
2. When USB async support is reverted (commit
SHA1: 02b0e1a36c5bc20174299312556ec4e266872bd6 [*])
- Error is detected after ~1h - pendrive [1]
3. With this patchset applied
- 12h of testing - no error - pendrive [1]
With the pendrive [2] I do observe that very often it is not recognized at all. Even more strange - there is a difference in the reliability of being recognized between identical pendrives (used one vs. just unboxed one).
Lukasz Majewski (5):
Revert "usb: ehci-hcd: Keep async schedule running"
usb: Handle XACTERR error in DATA phase of USB storage
usb: Add some delay to wait for slow USB devices to be operational
usb: Provide code to handle spinup of USB usb devices (mostly HDDs)
usb: Handle QT_TOKEN_STATUS_XACTERR error when sending data
common/usb.c | 10 ++++- common/usb_storage.c | 46 ++++++++++++++++++++++ drivers/usb/host/ehci-hcd.c | 78 ++++++++++++++++++++++++++----------- include/usb.h | 1 + include/usb_defs.h | 1 + 5 files changed, 112 insertions(+), 24 deletions(-)
Signature · 1 line
2.20.1