RFC Enable SERDES power up/down
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 RFC Latest1 patch 2 repliesIn review
- v1 RFC1 patch 6 repliesSuperseded
Changes in v2 from the cover letter
1.Only the configuration of the SERDES logic is kept, other SW acrh has
changed.
2.Removed the proposed new files intel_serdes.c and intel_serdes.h and
moved the SERDES configuration logic to dwmac-intel.c and dwmac_intel.h.
3.Added 2 BSP callbacks ->serdes_powerup() and ->serdes_powerup(). 4.The suggested 2 new BSP callbacks is called in stmmac_dvr_probe() and
stmmac_dvr_remove().
Patches in v2 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/1 | net: stmmac: Enable SERDES power up/down sequencedrivers/ drivers/ include/ | +184 | 2 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [RFC,net-next,v2, 0/1] Enable SERDES power up/down
Changes from v1:
1.Only the configuration of the SERDES logic is kept, other SW acrh has
changed.
2.Removed the proposed new files intel_serdes.c and intel_serdes.h and
moved the SERDES configuration logic to dwmac-intel.c and dwmac_intel.h.
3.Added 2 BSP callbacks ->serdes_powerup() and ->serdes_powerup(). 4.The suggested 2 new BSP callbacks is called in stmmac_dvr_probe() and
stmmac_dvr_remove().
This platform specific SERDES configuration not able separate 100% cleanly from the main dwmac logic because mdio communication is needed for configuring the SERDES power-up sequence. As for SERDES power-down sequence, it must be configured after all dma stop and before unregister the mdio bus.
This implementation should have the least changes on the
main dwmac logic but still serve the purpose for providing BSP callback for any platform that needs to configure SERDES.
Voon Weifeng (1):
net: stmmac: Enable SERDES power up/down sequence
.../net/ethernet/stmicro/stmmac/dwmac-intel.c | 171 ++++++++++++++++++ .../net/ethernet/stmicro/stmmac/stmmac_main.c | 10 + include/linux/stmmac.h | 3 + 3 files changed, 184 insertions(+)
Signature · 1 line
2.17.1