Skip to content

arm: stm32mp: reset to default environment when serial# change

Wolfgang Denk u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest10 of 16 patches 0 repliesNew

10 of 16 patches are in this archive. Their subjects are numbered up to 16.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
3/16arm: stm32mp: reset to default environment when serial# change+0 -01 reply
3/16arm: stm32mp: reset to default environment when serial# change+0 -00 replies
4/16arm: stm32mp: detect U-Boot version used to save environment+0 -01 reply
4/16arm: stm32mp: detect U-Boot version used to save environment+0 -01 reply
5/16arm: stm32mp: spl: add bsec driver in SPL+0 -01 reply
6/16arm: stm32mp: spl: display error in board_init_f+0 -01 reply
6/16arm: stm32mp: spl: display error in board_init_f+0 -01 reply
8/16board: stm32mp1: update management of boot-led+0 -00 replies
9/16board: stm32mp1: gt9147 IRQ before reset on EV1+0 -00 replies
11/16board: stm32mp1: check env_get result in board_late_init+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread