Skip to content

clk: imx: pllv3: add enable_bit

sbabic at denx.de u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v3 Latest19 patches 0 repliesNew

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/19clk: imx: pllv3: add enable_bit+0 -00 replies
2/19clk: imx: clk-imxrt1050: fix typo in clock name "video:"+0 -00 replies
3/19clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL+0 -00 replies
4/19clk: imx: clk-imxrt1050: add set_parent() callback+0 -00 replies
5/19videomodes: add helper function to convert from ctfb to display_timing+0 -00 replies
6/19sunxi: display: use common video_ctfb_mode_to_display_timing()+0 -00 replies
7/19video: mxsfb: add support for DM CLK+0 -00 replies
8/19video: mxsfb: add support for i.MXRT+0 -00 replies
9/19video: mxsfb: refactor for using display_timings+0 -00 replies
10/19video: mxsfb: enable setting HSYNC negative polarity+0 -00 replies
11/19video: mxsfb: enable setting VSYNC negative polarity+0 -00 replies
12/19video: mxsfb: enable setting PIXDATA on negative edge+0 -00 replies
13/19video: mxsfb: enable setting ENABLE negative polarity+0 -00 replies
14/19imxrt1050_evk: add 16bpp video support if video layer enabled+0 -00 replies
15/19ARM: dts: i.mxrt1050: add lcdif node+0 -00 replies
16/19ARM: dts: imxrt1050: allow this dtsi file to be compiled in Linux+0 -00 replies
17/19arch: arm: dts: imxrt1050-evk: add lcdif node+0 -00 replies
18/19configs: imxrt1050-evk: enable video support/console+0 -00 replies
19/19configs: imxrt1050-evk: temporary disable DCACHE+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread