Enable SERDES power up/down
Status from this message: Applied, thanks.
Get series with b4
b4 am [email protected]Versions newest first
Patches in v1 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/1 | net: stmmac: Enable SERDES power up/down sequencedrivers/ drivers/ drivers/ +1 more | +237 | 1 reply |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [net-next,v1, 0/1] Enable SERDES power up/down
This patch is to enable Intel SERDES power up/down sequence. The SERDES converts 8/10 bits data to SGMII signal.
1.Introduced 2 new BSP callbacks ->serdes_powerup() and ->serdes_powerdown(). 2.The 2 new BSP callbacks is called in stmmac_dvr_probe() and
stmmac_resume() for SERDER powerup; stmmac_dvr_remove() and stmmac_suspend() for SERDES powerdown.
3.Intel platform specific SERDES powerup and powerdown sequence functions
are added in dwmac-intel.c.
4.Since configuring the SERDES is through mdio, mdio communication is
needed to be up before powerup sequence. As for SERDES power-down sequence, it must be configured after all dma stop and before unregister the mdio bus.
5.New file dwmac-intel.h is created for register definition.
Voon Weifeng (1):
net: stmmac: Enable SERDES power up/down sequence
.../net/ethernet/stmicro/stmmac/dwmac-intel.c | 189 ++++++++++++++++++ .../net/ethernet/stmicro/stmmac/dwmac-intel.h | 23 +++ .../net/ethernet/stmicro/stmmac/stmmac_main.c | 23 +++ include/linux/stmmac.h | 2 + 4 files changed, 237 insertions(+) create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
Signature · 1 line
2.17.1