Skip to content

*mfd: Add support for Khadas Microcontroller

Neil Armstrong linux-amlogic linux-arm-kernel linux-pm lkml 5 versions – Applied

Status from this message: Applied, thanks.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest2 patches 3 repliesApplied
  2. v42 patches 5 repliesSuperseded
  3. v35 patches 8 repliesApplied
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v26 patches11 repliesSuperseded
v1 RFC8 patches5 repliesSuperseded

Patches in v5 Applied

#Subject and filesSizeRepliesApplied
1/2thermal: add support for the MCU controlled FAN on Khadas boardsdrivers/thermal/Kconfig drivers/thermal/Makefile drivers/thermal/khadas_mcu_fan.c+174 -02 replies
2/2arm64: dts: meson-khadas-vim3: add Khadas MCU nodesarch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi+23 -01 reply

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchAmit KucheriaDaniel Lezcano
1/2R-b A-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH v5 0/2] *mfd: Add support for Khadas Microcontroller

The new Khadas VIM2, VIM3 and Edge boards embeds an on-board microcontroller connected via I2C.

This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge boards.

It has multiple boot control features like password check, power-on options, power-off control and system FAN control on recent boards.

Thie serie adds :
- the Thermal Cooling cell driver
- add support into the Khadas VIM3/VIM3L DT

Changes since v4 at [5]:
- Removed ctx checks in thermal driver
- Removed the useless khadas_mcu_fan_disable() helper in thermal driver
- Fixed a small indentation issue in thermal driver

Changes since v3 at [4]:
- Removed Applied patches 1, 2 & 4
- Added reviewed-by tags for patch 3 & 5

Changes since v2 at [3]:
- Removed NVMEM driver for separate submission
- fixed MFD driver, header and Kconfig
- fixed Thermal Kconfig
- fixed MAINTAINERS files and path

Changes since RFC v1 at [2]:
- moved hwmon driver to thermal-only
- moved the SM1 thermal nodes in a separate serie
- added the bindings review tag from rob

[1] http://lore.kernel.org/r/[email protected]
[2] http://lore.kernel.org/r/[email protected]
[3] http://lore.kernel.org/r/[email protected]
[4] http://lore.kernel.org/r/[email protected]
[5] http://lore.kernel.org/r/[email protected]

Neil Armstrong (2):
thermal: add support for the MCU controlled FAN on Khadas boards
arm64: dts: meson-khadas-vim3: add Khadas MCU nodes

 .../boot/dts/amlogic/meson-khadas-vim3.dtsi   |  23 +++
 drivers/thermal/Kconfig                       |  11 ++
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/khadas_mcu_fan.c              | 162 ++++++++++++++++++
 4 files changed, 197 insertions(+)
 create mode 100644 drivers/thermal/khadas_mcu_fan.c
Signature · 7 lines
2.22.0


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic