Skip to content

xhci fixes for usb-linus

Mathias Nyman linux-usb stable 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3xhci: Fix handling halted endpoint even if endpoint ring appears emptydrivers/usb/host/xhci-ring.c drivers/usb/host/xhci.c drivers/usb/host/xhci.h+39 -101 reply
2/3xhci: prevent bus suspend if a roothub port detected a over-current conditiondrivers/usb/host/xhci-hub.c+9 -00 replies
3/3xhci: Don't clear hub TT buffer on ep0 protocol stalldrivers/usb/host/xhci-ring.c+11 -50 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] xhci fixes for usb-linus

Hi Greg

These xhci fixes for usb-linus sort out halted empty endpoint handling, protocol stall handling, and overcurrent handling.

Theses issues have caused usb devices to appear as if they stop working suddenly, failed to enumerate LS/FS devices behind HS hubs (seen on some audio devices), and host from freezing in case of suspend on over-current.

-Mathias

Mathias Nyman (3):
xhci: Fix handling halted endpoint even if endpoint ring appears empty
xhci: prevent bus suspend if a roothub port detected a over-current
condition
xhci: Don't clear hub TT buffer on ep0 protocol stall

 drivers/usb/host/xhci-hub.c  |  9 +++++++
 drivers/usb/host/xhci-ring.c | 46 +++++++++++++++++++++++++++++++-----
 drivers/usb/host/xhci.c      | 14 +++++------
 drivers/usb/host/xhci.h      |  5 ++--
 4 files changed, 59 insertions(+), 15 deletions(-)
Signature · 1 line
2.17.1