stm32mp1: several board and arch updates
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest posting 2/20 of 12 patches 0 repliesNew
- v2 posting 1/212 patches 0 repliesSuperseded
Patches in v2 posting 2/2 No applies recorded yet
None of the 12 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [PATCH v2 00/12] stm32mp1: several board and arch updates
Hi,
Quoted 61 lines
From: Patrick DELAUNAY <[email protected]>
Sent: mercredi 22 avril 2020 14:29It is a V2 for the serie
http://patchwork.ozlabs.org/project/uboot/list/?series=167872Rebased on master branch and after the first reviews:
[01/16] arm: stm32mp: update dependency for
STM32_ETZPC
is already accepted/merged[03/16] arm: stm32mp: reset to default environment when serial# change [04/16]
arm: stm32mp: detect U-Boot version used to save environment [11/16] board:
stm32mp1: checkenv_getresult inboard_late_init
are dropped[05/16] arm: stm32mp: spl: add bsec driver in SPL
this unrelated patch is moved in a separate serie:
"stm32mp1: use OPP information for PLL1 settings in SPL"Changes in v2:
- minor commit message update
- simplify patch after Wolfgang review, as console init alway failed when drivers can't probe (remove printf afterpreloader_console_initcall)
- useCONFIG_IS_ENABLED(LED)everywhere
- remove debug message and unused return ofboard_ev1_init
- remove bootdelay configuration after Wolfgang's comment on dropped patch [11/16] board: stm32mp1: checkenv_getresult inboard_late_initChristophe Roullier (1):
configs: stm32mp1: activate Ethernet PHY RealtekPatrice Chotard (1):
board: stm32mp1: Keep error led ON in case of low power detectionPatrick Delaunay (10):
arm: stm32mp: remove dependency for STM32KEY
arm: stm32mp: spl: update error management inboard_init_f
board: stm32mp1: update management of boot-led
board: stm32mp1: gt9147 IRQ before reset on EV1
board: stm32mp1: set environment variable fdtfile
board: stm32mp1: remove bootdelay configuration for usb or serial boot
board: stm32mp1: add timeout for I/O compensation ready
gpio: stm32: support gpio ops in SPL
ARM: dts: stm32mp15: use DDR3 files generated by STM32CubeMX
configs: stm32mp1: activateCONFIG_ERRNO_STR.../dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi | 49 +++++---- .../dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi | 49 +++++---- arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 4 - arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 4 - arch/arm/mach-stm32mp/Kconfig | 2 - arch/arm/mach-stm32mp/spl.c | 6 +- board/st/stm32mp1/stm32mp1.c | 102 +++++++++++++----- configs/stm32mp15_basic_defconfig | 2 + configs/stm32mp15_trusted_defconfig | 2 + drivers/gpio/stm32_gpio.c | 7 +- 10 files changed, 130 insertions(+), 97 deletions(-)
Quoted 2 lines
--
2.17.1
For the serie applied to u-boot-stm/master, thanks!
Regards
Patrick