net: dsa: mv88e6xxx: augment phylink support for 10G
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 1 replyIn review
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH net-next 0/2] net: dsa: mv88e6xxx: augment phylink support for 10G
Hi,
This series adds phylink 10G support for the 88E6390 series switches, as suggested by Andrew Lunn.
The first patch cleans up the code to use generic definitions for the registers in a similar way to what was done with the initial conversion of 1G serdes support.
The second patch adds the necessary bits 10GBASE mode to the pcs_get_state() method.
drivers/net/dsa/mv88e6xxx/serdes.c | 55 ++++++++++++++++++++++++++++++++------ drivers/net/dsa/mv88e6xxx/serdes.h | 7 ++--- 2 files changed, 49 insertions(+), 13 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up