Skip to content

mtd: gpmi: change the BCH layout setting for large oob NAND

sbabic at denx.de u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest14 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/14mtd: gpmi: change the BCH layout setting for large oob NAND+0 -00 replies
2/14mtd: gpmi: provide the option to use legacy bch geometry+0 -00 replies
3/14nand: mxs: fix the bitflips for erased page when uncorrectable error+0 -00 replies
4/14nand: mxs: correct bitflip for erased NAND page+0 -00 replies
5/14mxs_nand: Add support for i.MX8M+0 -00 replies
6/14nand: Update SPL MXS NAND mini driver+0 -00 replies
7/14mxs_nand: Update compatible string for i.MX6SX+0 -00 replies
8/14mtd: nand: mxs_nand: add i.MX6QP compatible string+0 -00 replies
9/14mtd: mxs_nand: fix the gf_13/14 definition issue+0 -00 replies
10/14nand: mxs_nand: make imx8mm can use hardware BCH and randomizer+0 -00 replies
11/14mtd: nand: support GPMI NAND driver for i.MX8+0 -00 replies
12/14MXS_NAND: Add clock support for iMX8+0 -00 replies
13/14mxs_nand: don't check zero count when ECC reading with randomizer+0 -00 replies
14/14nand: enable the Randomizer module for i.mx7 and i.mx8+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread